Z650 switchgear - lights on/off mount

mothra · #1 PostAuthor: **mothra** » Fri Dec 12, 2008 2:18 pm

Aaaarrggh Again.

I'm posting on the offchance you can help me out - just snapped off the screw that holds the lights on/off switch on the RHS switchgear. Anyone happen to have an old set of switchgear you want to offload, so I can swap out the switch mount? Deosn't matter how skanky, just think that would be a lot easier than trying to remove the broken off screw with a tiny EZout.

Thanks,

Stu

zedtwo · #2 PostAuthor: **zedtwo** » Fri Dec 12, 2008 3:56 pm

If no replies , Try Z-Power or John Browse .

mothra · #3 PostAuthor: **mothra** » Fri Dec 12, 2008 4:01 pm

Yeah, thanks for that - I suspect that as there's no part number for the mounting block they'll both want to sell me a complete switchgear in perfect working order - I'm hoping someone has something really nasty I can cannibalise... :-)

#4 PostAuthor: **Taffus** » Fri Dec 12, 2008 4:28 pm

just had a look no switch gear, sorry

mothra · #5 PostAuthor: **mothra** » Fri Dec 12, 2008 5:31 pm

Thanks for trying Taffus, appreciated...

zedtwo · #6 PostAuthor: **zedtwo** » Fri Dec 12, 2008 5:49 pm

Z-Power do have some used spares but not listed and John Browse is good , A few years back i damaged a needle from a carb and he had a good used one which worked perfect. Phone numbers are in newzletter !

mothra · #7 PostAuthor: **mothra** » Fri Dec 12, 2008 9:13 pm

Cool, thanks zedtwo - I'll give them a go and let you know the results...

Davy Doherty · #8 PostAuthor: **Davy Doherty** » Fri Dec 12, 2008 9:30 pm

I have some old z9 switch gear, can you post a pic of the part you need it would help a lot,

tlc · #9 PostAuthor: **tlc** » Sat Dec 13, 2008 11:47 am

I`ve got some Z1000 switch housings.

Post a pic and I`ll see what I have !

GUYZED · #10 PostAuthor: **GUYZED** » Sat Dec 13, 2008 4:24 pm

Stu,

i might have some old switch gear you can have

mothra · #11 PostAuthor: **mothra** » Sun Dec 14, 2008 12:18 pm

You guys are all bloody awesome.

I've included three photos to try to get the idea across - one of the switchgear housing, one looking in, and one of the bit I need on it's own...

As you can see, it's pretty small. Anyone got one?

Any help very gratefully received...

Stu

mothra · #12 PostAuthor: **mothra** » Sun Dec 14, 2008 5:21 pm

And how about that, Guyzed just dropped a replacement round to me; I can get the new bars on the bike now - Thanks so much to everyone for all the help, but especially Guy!

tlc · #13 PostAuthor: **tlc** » Sun Dec 14, 2008 5:25 pm

Seconded. Guy is a top fella`

Now we`ll look forward to seeing your 650 next summer.

Hope it`s got a centre stand :wink:

Pigford · #14 PostAuthor: **Pigford** » Sun Dec 14, 2008 6:08 pm

Well done Guy.... :wink:

(you're still sad buying that little pottery thingy tho :roll:

)

mothra · #15 PostAuthor: **mothra** » Sun Dec 14, 2008 7:01 pm

Ummm, Tailiftchris, yes, it does have a centre stand - is that good or bad? :-)

Z650 switchgear - lights on/off mount

Z650 switchgear - lights on/off mount

Switchgear parts?

Switchgear parts?

Switchgear - solved

Centre stand...

Who is online