Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1 B brake pad shims
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Z1 B brake pad shims
Any one know were i can get anti squeal shims for my z1b disc brake i have tried all the old fixes i know copper grease.rubber compound on pad backs etc all free on splines .tried sintered and non sintered pads has any one any more ideas is it the design of system? a lot of zeds seem prone to this.......
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
I,m sure you could make some up from some thin shim material,steel or stainless as long as you know the shape of them,a metal supplier should be able to help.I think the Z1B uses the same pads as the Z1A one of which has two pins on the back of the pad which locates the anti squeal shim in place,a lot of pattern pads do not have these pins fitted. This would then cause a problem when trying to fit the shims,are genuine (ie with pins) pads still available? 
Who is online
Users browsing this forum: No registered users and 18 guests