Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Front brake master cylinder

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Z1B Alan
100Club
100Club
Posts: 250
Joined: 14th Nov 2006
Location: ellesmere port

Front brake master cylinder

#1 PostAuthor: Z1B Alan » Tue Jul 22, 2008 8:08 pm

After a short ride the other day I noticed damp oiley residue on the right hand switch gear this I believe is from a weeping master cylinder. the cylinder is the 5/8 one for the twin disc setup I have and Z Power sell the repair kit my question is this? is it a difficult repair and do I need any service tools for the job etc.????. Will dot 4 brake fluid be ok or is a special fluid required . Our kid John Roscoe is a wiz with the spanners so any advice in advance would be good.
p.s. He's on holiday at the moment so if the news is bad I can break it to him on the phone :oops:
They run, They break , You spend and so it goes on
Top
User avatar
zedtwo
100Club
100Club
Posts: 152
Joined: 23rd Aug 2004

#2 PostAuthor: zedtwo » Wed Jul 23, 2008 8:39 am

No , It is not hard to do but patience is required ! Only special tool is a long nose circlip pliers to remove the piston from master cylinder and Dot 4 fluid will be OK .
Top
User avatar
z1bnackerkwacker
Custard Cream
Custard Cream
Posts: 690
Joined: 20th May 2006
Location: Swansea

Re: Front brake master cylinder

#3 PostAuthor: z1bnackerkwacker » Wed Jul 23, 2008 10:20 pm

Z1B Alan wrote: is it a difficult repair and do I need any service tools for the job etc.???? :oops:



Circlip is a pain to get out
Had to modify a pair of ordinary circlip pliers to fit...Otherwise easy enough..
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 14 guests