Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Dyna S Ignition on ELR

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
martinz1000r
Custard Cream
Custard Cream
Posts: 955
Joined: 1st Jul 2007
Location: Oxfordshire

Dyna S Ignition on ELR

#1 PostAuthor: martinz1000r » Fri Jul 11, 2008 2:09 pm

Is this a worthwhile investment on my 1984 Z1000R? As it slowly comes back together and I have a little cash is it worth splashing out?

Recommendations welcomed!
Z1000R, Moto Martin, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, Yamaha YZF750SP, SP1 Hoonda, Katana 1100, Bimota SB6R
Top
User avatar
floydsz1
Hardcore
Hardcore
Posts: 1476
Joined: 24th Jun 2007
Location: SUNNY MORECAMBE

#2 PostAuthor: floydsz1 » Fri Jul 11, 2008 2:50 pm

Hi Martin,
I Always fit one to my bikes Z1 Z1A and A4. and as they all start and run better i find it a good investment. I buy mine from Jeff at z1 enterprises due to the exchange rate, plus they only take 15 mins to fit.
peter.
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#3 PostAuthor: Rich » Fri Jul 11, 2008 4:48 pm

What's wrong with your std ignition?
Rich
 diplomacy is a form of art - I was never any good at art
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#4 PostAuthor: RALPHARAMA » Fri Jul 11, 2008 10:24 pm

Z1 Enterprises seem to want about half the cost of buying one in the UK. I have to say if I get another Zed the first thing I'll do is pop Dyna S on it. The dearer ones really aren't worth the extra wedge and are quite temperamental.

Go for it mate! They're Gerrrrrrrrreat! -- Sadly I'm not on commission :(
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Top
User avatar
chrisNI
Site Admin
Posts: 2316
Joined: 22nd Dec 2001
Location: NI

#5 PostAuthor: chrisNI » Sat Jul 12, 2008 12:18 am

I think what Rich means is the electronic ignition on the 1000R is pretty reliable - the Dyna S is a shitload better than points but if the Kwak ignition is working why change it.
Top
martinz1000r
Custard Cream
Custard Cream
Posts: 955
Joined: 1st Jul 2007
Location: Oxfordshire

#6 PostAuthor: martinz1000r » Sun Jul 13, 2008 6:28 pm

Thanks to Rich and ChrisNI! There is nothing wrong with the standard ignition hence the question - would I gain anything?

From what you both say then the answer is no and I'll keep the cash a bit longer until the standard packs up!
Z1000R, Moto Martin, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, Yamaha YZF750SP, SP1 Hoonda, Katana 1100, Bimota SB6R
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#7 PostAuthor: Rich » Mon Jul 14, 2008 5:31 pm

You would gain a bit if you put the coils on, but you would probably not notice with a std engine and loom in good condition. The ignition unit it is reliable and certainly on a par with the Dyna S unit.
Rich
 diplomacy is a form of art - I was never any good at art
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 13 guests