My 79' Z1R revs like mad on cold start 3750 ish RPM. I have tried using less choke but the bike will only start on full choke you can then immediately close the choke off to a suitable level and the bike warms up fine.
The carbs have been jetted with the correct jets, so I have been told ?
Is it the jet size or something else ?
Any advice welcome.
pilgrimz1r
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
High rev start
Moderators: KeithZ1R, chrisu, paul doran, Taffus
But its better to get the oil round quick (without loading engine) than to let it idle real slow 
Who is online
Users browsing this forum: No registered users and 18 guests