Big Fluff wrote:[However, case hardening is typically around .0014" (0.3mm) deep into the material. Now although I don't condone shim grinding, taking a couple of thou' (0.5mm) off each end isn't going to hurt.
Missing 0?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Shimz
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: Shim grinding
Missing 0?
Re: Shim grinding
chrisNI wrote:Big Fluff wrote:[However, case hardening is typically around .0014" (0.3mm) deep into the material. Now although I don't condone shim grinding, taking a couple of thou' (0.5mm) off each end isn't going to hurt.
Missing 0?
Yes Chris, that should obviously have read 0.05mm
Kawasaki H2C 750, ZRX1100R, H**** VF1000RG Rothmans, H**** VF500F2F, Suzuki GSXR750F Slabbie
Who is online
Users browsing this forum: No registered users and 21 guests