Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Reproduction Rear Shock Absorbers

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
toycollector10
100Club
100Club
Posts: 401
Joined: 10th Dec 2007
Location: New Zealand

Reproduction Rear Shock Absorbers

#1 PostAuthor: toycollector10 » Tue Apr 22, 2008 11:09 am

These are all over the internet and various suppliers have them in stock. Are they any good or should I buy a set of used OEM from a wrecked bike?

Image
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#2 PostAuthor: Pigford » Tue Apr 22, 2008 5:24 pm

For looks, they gotta be 1st choice, and it don't matter if they ain't of Ohlins quality, coz I'm sure they won't be worse than a +30yrs old set!
But, i think you're after 100% originality, so you better source some OEM shox :wink:
And on the 7th day... Zeds were created!
Top
User avatar
prowlerz1
100Club
100Club
Posts: 357
Joined: 22nd Dec 2001

#3 PostAuthor: prowlerz1 » Tue Apr 22, 2008 9:15 pm

i have a set fitted as do a few of my mates and they are very good shocks have the look of the originals without the spongy ness for the price its well worth investing at least until somebody can totally refurb oem ones not just replace or rechrome the externals
73 z1 green
73 z1 brown
74 z1a brown
75 z1b red
75 z1b blue
76 z900 green
77 z1000 black
Zrx1200r
Top
User avatar
Murph
100Club
100Club
Posts: 408
Joined: 18th Jul 2007
Location: Fife, Scotland . 21Club

#4 PostAuthor: Murph » Wed Apr 23, 2008 10:15 am

Just bought a set of shocks for my a4 that look almost the
same but with no reflector.
they are 365mm long and once fitted they jacked the back end up
by thirty odd mm i didn.t realise what a difference they would
make to the bike it feels and ride.s so much better now. They were
fifty five quid the best buy i.ve made in age.s .
But i.m not one to worry about originality to much so they suit me :wink:
Z9A4, Z1170R, ZZR1100
Top
User avatar
paul doran
Area Rep.
Area Rep.
Posts: 15910
Joined: 24th Sep 2004
Location: near Dublin Ireland

#5 PostAuthor: paul doran » Wed Apr 23, 2008 5:18 pm

what concern's me is the lack of a roll pin at the neck of the shock to stop the damper rod unwinding
this has been discussed before and if I am not mistaken Mike dogsbollox Z1B voiced concern's over the same issue in the past
way too many Zeds
Top
User avatar
floydsz1
Hardcore
Hardcore
Posts: 1476
Joined: 24th Jun 2007
Location: SUNNY MORECAMBE

#6 PostAuthor: floydsz1 » Wed Apr 23, 2008 5:22 pm

I have modern hagon ones on my z1a, if you take the stickers off they look very simular to standard ones but work excellent. I'm not bothered about 100% originality but a lot off people think they are original.
Top
User avatar
toycollector10
100Club
100Club
Posts: 401
Joined: 10th Dec 2007
Location: New Zealand

#7 PostAuthor: toycollector10 » Sun Jun 29, 2008 5:41 am

I have decided I want to keep my original shockies. The springs are rusted and the PO painted them black to disguise the rust. I don't know squat about these things. Can I take them apart to get the spring out to get it rechromed? If so, how? Thanks.
Top
User avatar
02GF74
100Club
100Club
Posts: 334
Joined: 31st Mar 2008
Location: South Herts

#8 PostAuthor: 02GF74 » Mon Jun 30, 2008 8:16 am

toycollector10 wrote:Can I take them apart to get the spring out to get it rechromed? If so, how? Thanks.


I'd be interested in knowing that; I couldn't see any way that did not require introduction to Mr Angry Grinder.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 14 guests