Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

running rich?

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

running rich?

#1 PostAuthor: mikey » Sat Apr 05, 2008 10:28 am

Think me Z1000A2 running rich clean the plugs and its ok for a bit, every now and again start it up and a couple plugs get wet with petrol not oil, its running standard airbox air filter jets needle clip in standard position etc etc on 1st oversize bore done about 250 miles since rebore and recently its started to smoke on start up, just put a harris exhaust on it last week that seemed to improve things a bit, last exhaust was a made up thing between a harris and a piper, so could it be running rich? would moving the needle position improve things, never had a bike thats given me so much grief any help or suggestions very appreciated.
Making the world a shiny place with a factory finish
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#2 PostAuthor: Pigford » Sat Apr 05, 2008 11:49 am

Mikey, you sure your ignition system is good... this can have similar effect as runing rich. Hope you're using DENSO's :shock:
And on the 7th day... Zeds were created!
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#3 PostAuthor: RALPHARAMA » Sat Apr 05, 2008 3:22 pm

Mikey came round to visit just as I was typing this reply! From the description I wouldn't be surprised if the nasty NGKs he is using are causing the problem. Like my bike his tail piece tool tray came full of NGK plugs! He is going to try some Densos as a first stab at curing the problem!
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Top
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

#4 PostAuthor: mikey » Sat Apr 05, 2008 3:41 pm

Cheers guys just gonna order them NDs now thanks for the coffee
ralph notice we didnt eat all your biccies like piggy pigford did. :wink:
Making the world a shiny place with a factory finish
Top
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

#5 PostAuthor: mikey » Sat Apr 05, 2008 4:23 pm

Plugs orderd and on there way see if that sorts it.
Making the world a shiny place with a factory finish
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 11 guests