Z1000 M1 CSR Speedo swap info

[Dark Skies]

The speedo on my CSR only goes up to 80 / 90 MPH. Does anyone know what other speedos I can replace it with? I'd like to keep the same dimensions as the current clocks - just need the indications to go up to 140 / 160 MPH. Did Kawasaki stick with the same internal gearing ratio? The front wheel is 19 inches. Speedo is cable driven.

Cheers.

[london calling]

The CSR was an American only model,the LTD models had an electronic speedo.
Try a Z650 140MPH or Z900/Z1000 160MPH but they are a slightly different style.
Possibly try the Z750 LTD clocks

[Dark Skies]

The CSR was an American only model,the LTD models had an electronic speedo.
Try a Z650 140MPH or Z900/Z1000 160MPH but they are a slightly different style.
Possibly try the Z750 LTD clocks

There's a Z1R clock going on ebay which look very similar in style - do you think the gearing might be out a tad though? I think the Z1Rs might have had an 18" wheel.

[london calling]

Some Z1Rs had 18" wheels,some had 19".
Haven't got a Scooby Doo about the internal gearing,just suck it and see

[Pigford]

It won't make a LOT of difference, just read a tad higher, which has a 2-fold benefit,
1# Think your bikes faster than it really is
2# Make you slower/safer with the old speed camera's

I run 17" GSXR wheels with the standard clock, and it reads a fair bit higher, but no more than +10%

[Dark Skies]

Thanks everyone - snatched it from everyone right at the last minute for ?39 with a despicable sniping proggie. Hope it wasn't from anyone on this board.