Guys if like me you have had to buy a replacement master cylinder and ended up with the very nice looking one with the domed top but not satisfied it doesn't look the same as the original (anal I know)
I did the following
Take off lid and clean
Place lid top on a flat grinder and hone down flat
I've done it and the aluminium is thick enough to take it but stop as soon as it's flat
Rub down further with wet and dry
Spray with black calliper spray
Buy decal from eBay and stick it on
Perfect!
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Master Cylinder
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Master Cylinder
Just purchased a 1976 UK Z900 A4 for renovation. Wish me luck.
Bike now finished what a joy!
Bike now finished what a joy!
Who is online
Users browsing this forum: No registered users and 13 guests