Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1A Help required

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
531johns
100Club
100Club
Posts: 104
Joined: 12th Nov 2009
Location: Stroud, Gloucestershire

Z1A Help required

#1 PostAuthor: 531johns » Thu Apr 14, 2016 6:59 pm

Hi Guys not been back on here for a while as I have been away with work, anyway I have purchased an old Z1A to restore but it is proving to be a bit of a mare. Got all the body work bits but cannot identify the engine it has in it can you guys help?

engine number is as follows KZT000RE018057, I KNOW IT IS A z1000 MOTOR but which one?????
Z1000J, ZZR1400, RD400F, BMWM5.
Fully Paid up member,
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#2 PostAuthor: Pigford » Thu Apr 14, 2016 7:05 pm

I reckon its an A1, the number is most likely... KZT00AE018057
And on the 7th day... Zeds were created!
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#3 PostAuthor: z1bman » Thu Apr 14, 2016 7:22 pm

engine prefix is not correct you have either written it down wrong or its a dodgy enginge no
Top
User avatar
531johns
100Club
100Club
Posts: 104
Joined: 12th Nov 2009
Location: Stroud, Gloucestershire

#4 PostAuthor: 531johns » Thu Apr 14, 2016 8:35 pm

Hi

that is the one on the log book I will check on the engine tomorrow night and hopefully post some pics as well as the is an engine oil breather on the top of the cam covers that I do not recognise. Cam ends are slightly square but not like a Z1000j though but not rond like correct Z1A
Z1000J, ZZR1400, RD400F, BMWM5.

Fully Paid up member,
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#5 PostAuthor: z1bman » Thu Apr 14, 2016 9:24 pm

square cam cover would be a z1000 mk2 or z1r d2 if it has hoses going to the cover its an imported bike & they are not breathers they are for the emisions
Top
User avatar
531johns
100Club
100Club
Posts: 104
Joined: 12th Nov 2009
Location: Stroud, Gloucestershire

#6 PostAuthor: 531johns » Fri Apr 15, 2016 2:15 pm

Yep Phil at ZPower has confirmed it for me its a Z1000Ltd from USA with the breather pipes coming off the cam covers.

Great chaps 5 star A1 knowledge as always.

will load up some pics this weekend on the build so far anyway so you can all have a look
Z1000J, ZZR1400, RD400F, BMWM5.

Fully Paid up member,
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 14 guests