Stripping the J out for blasting and painting. Very last thing to remove from the frame was centrestand. Removed both locknuts, one pin out easy the other just spins. Tried pressure on it to grab the thread but no joy, anyone else come across this problem and find a solution.
All I can think of for now is to cut the extended thread off and drill out the pin then machine a new one up after re-tapping the thread...
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Centre Stand J Model
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Centre Stand J Model
Nico
Who is online
Users browsing this forum: No registered users and 13 guests