Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

GPZ unitrak handlebars

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

GPZ unitrak handlebars

#1 PostAuthor: RALPHARAMA » Sun Oct 25, 2015 2:03 pm

I have just made the joyous discovery that the handlebars on my 1100 unitrak are bent. Rather predictably given the state of the rest of the bike :evil: any one help?
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Top
User avatar
Gus
ZedHead
ZedHead
Posts: 1119
Joined: 17th Mar 2007
Location: Gloucestershire

#2 PostAuthor: Gus » Sun Oct 25, 2015 3:36 pm

Hi Ralph.

I may have some you can have but it will take a couple of days for me to check.

Cheers.

Gus
"Set the GRINDER on it"
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#3 PostAuthor: RALPHARAMA » Sun Oct 25, 2015 5:27 pm

Many thanks Gus :D
Ralph Ferrand

Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)

http://www.bikerstoolbox.co.uk
Top
User avatar
paul doran
Area Rep.
Area Rep.
Posts: 15910
Joined: 24th Sep 2004
Location: near Dublin Ireland

#4 PostAuthor: paul doran » Sun Oct 25, 2015 7:25 pm

I believe I have some if I did not throw them out
I will know in the morning
way too many Zeds
Top
User avatar
steve.w
ZedHead
ZedHead
Posts: 1156
Joined: 28th Jul 2008

#5 PostAuthor: steve.w » Mon Oct 26, 2015 6:01 pm

they are meant to be bent near the clamps :?:
Top
User avatar
Gus
ZedHead
ZedHead
Posts: 1119
Joined: 17th Mar 2007
Location: Gloucestershire

#6 PostAuthor: Gus » Tue Oct 27, 2015 5:04 pm

Hi Ralph.

Sorry, looked high and low but no sign of any I thought I had.

I'm sure the lovely Mr. Doran will come to the rescue

Cheers

Gus
"Set the GRINDER on it"
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#7 PostAuthor: RALPHARAMA » Tue Oct 27, 2015 5:43 pm

Gus wrote:Hi Ralph.

Sorry, looked high and low but no sign of any I thought I had.

I'm sure the lovely Mr. Doran will come to the rescue

Cheers

Gus


Thanks for looking - much appreciated :D
Ralph Ferrand

Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)

http://www.bikerstoolbox.co.uk
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#8 PostAuthor: RALPHARAMA » Tue Oct 27, 2015 5:48 pm

steve.w wrote:they are meant to be bent near the clamps :?:


The "bend" is where the tube waists to go into the clamp. Are you sure that is correct and not just where some knob has dropped the bike? when I put the waisted section into the 3 jaw chuck on the lathe and turn the chuck it 'wobbles'.
Ralph Ferrand

Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)

http://www.bikerstoolbox.co.uk
Top
User avatar
steve.w
ZedHead
ZedHead
Posts: 1156
Joined: 28th Jul 2008

#9 PostAuthor: steve.w » Tue Oct 27, 2015 5:52 pm

vduk wrote:
steve.w wrote:they are meant to be bent near the clamps :?:


The "bend" is where the tube waists to go into the clamp. Are you sure that is correct and not just where some knob has dropped the bike? when I put the waisted section into the 3 jaw chuck on the lathe and turn the chuck it 'wobbles'.
yep theres were its meant to be :wink:
Top
User avatar
steve.w
ZedHead
ZedHead
Posts: 1156
Joined: 28th Jul 2008

#10 PostAuthor: steve.w » Tue Oct 27, 2015 6:25 pm

Image
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 4 guests