I need my z1b engine cleaning. I saw that Mr smethurst was doing them without stripping them down. He pumps compressed air into them. As it runs and sounds perfect I don't really want to pull it apart. Just wondered if anyone has had theirs done this way.
Cheers.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
engine cleaning
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
wheelysteve
- 100Club
- Posts: 450
- Joined: 10th Mar 2014
- Location: Wokingham, Berks
-
needaz1100r
- Custard Cream
- Posts: 601
- Joined: 11th Sep 2012
- Location: Reading
What about the bolts etc?
If it's going to stay bare, you need to make sure they don't get the plating blasted off causing them to rust.
If you're going to paint it, there's nothing worse than an engine with all the bolts and gaskets painted.
Actually, that's not true, there are worse things.....
If it's going to stay bare, you need to make sure they don't get the plating blasted off causing them to rust.
If you're going to paint it, there's nothing worse than an engine with all the bolts and gaskets painted.
Actually, that's not true, there are worse things.....
Cheers,
Mark.
Mark.
Who is online
Users browsing this forum: No registered users and 14 guests