APE Degree Wheel & Positive Stop Tool

#1 PostAuthor: **Ginger Bear** » Sat Sep 12, 2015 8:12 am

Anybody got either of the above they're willing to sell?

slappa13 · #2 PostAuthor: **slappa13** » Sat Sep 12, 2015 9:33 am

I've got some bits being shipped from Joe hooper on Monday, can add to shipment takes about 7 days

slappa13 · #3 PostAuthor: **slappa13** » Sat Sep 12, 2015 9:34 am

Al · #4 PostAuthor: Al » Sat Sep 12, 2015 9:51 am

Degree wheel: If youre using it on a J motor (or MKII / ST ) print off a paper one from the internet (OSP did have one for download) and glue it onto a piece of 18 gauge mild steel.
Cut round after and drill a 20 or so mm hole in the middle so it self centres.
No need to undo the rotor fixing bolt to use it and you can still use the bolt to turn the motor, it just sticks to the magnet body.
Cheap and satisfying.

AL

martinz1000r · #5 PostAuthor: **martinz1000r** » Sat Sep 12, 2015 10:59 am

i have both that you can borrow. Cover post and remember to return!

Padders · #6 PostAuthor: **Padders** » Sat Sep 12, 2015 11:00 am

I have a positive stop tool you can have Steve drop me your details and I will put it in the post.

#7 PostAuthor: **Ginger Bear** » Sat Sep 12, 2015 12:31 pm

Guys,

Thanks for your responses.

Ideally I want to have these on hand for future use.

Neil & Ian, PM's are on there way to you both.

KWACKERZ1 · #8 PostAuthor: **KWACKERZ1** » Mon Sep 14, 2015 7:59 am

Steve,
dont buy an APE Degree wheel at Â£18.00.
I got some from a scooter place for about $4 each exactly the same quality.
I'll dig out the details later.

APE Degree Wheel & Positive Stop Tool

APE Degree Wheel & Positive Stop Tool

Who is online