Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

UniTrak charging

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

UniTrak charging

#1 PostAuthor: tlc » Sat May 16, 2015 4:42 pm

This is all new to me but I have a charging problem.
As far as I can tell the Reg Rec is good. I've done the static resistance tests.
It's the output from the stator I think I need help with.

Any pointers chaps?
Asphalt Cowboy

Phil Churchett award winner 2015
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#2 PostAuthor: PAULJAC47 » Sat May 16, 2015 5:09 pm

Hi Chris, should be standard 3 phase genny, with engine running you should get about 50 volts ac across any 2 and all of the three output wires in any combo,you should get about 14.6 volts dc across the battery at about 3k revs,Cheers Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#3 PostAuthor: tlc » Sat May 16, 2015 5:38 pm

Hi Paul.
I will do the check thanks. My god the gen manual is confusing.

I knew someone would know a simple way.
Asphalt Cowboy



Phil Churchett award winner 2015
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 15 guests