Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Next question

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Bullhead
Regular Poster
Posts: 29
Joined: 8th Nov 2014
Location: Grimsby, England

Next question

#1 PostAuthor: Bullhead » Mon May 04, 2015 2:18 pm

Right so far you lot have answered / helped with my problems. Next i have just took the tank off and noticed that the little lengths of rubber pipe blanking things on the carbs are fill of holes and perished. Would that of effected the bikes running.
2) :D I take it thats the same tubes i fit the carb balancer.
3) Which carb is the one for the base cylinder
D) which screws do i turn to adjust the carbs

Thanks again all
Top
User avatar
ZedHead
Hardcore
Hardcore
Posts: 1950
Joined: 9th May 2009
Location: North Yorkshire
Contact:
Contact ZedHead

#2 PostAuthor: ZedHead » Mon May 04, 2015 3:30 pm

Yes, these are the vaccuum points used to balance the carbs. If leaking the bike will run lean on the effected cylinder/s and possibly misfire.

I would get someone to help you set the carbs up if you not done it before. It will give you confidence to do it on your own in the future.

This is a good site for manuals and parts lists. Best of all it is free :D :D
Top
Bullhead
Regular Poster
Posts: 29
Joined: 8th Nov 2014
Location: Grimsby, England

#3 PostAuthor: Bullhead » Mon May 04, 2015 6:20 pm

After making new pipes, replacing valve cover gasket and torquing the top end and exhaust down pipes it runs like a top.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 11 guests