AP Lockheed CP2696-110C Calipers

ADRIAN H · #1 PostAuthor: **ADRIAN H** » Mon Mar 30, 2015 7:22 pm

Does anyone know of a company that stocks Brake pistons & caliper repair kits for AP Lockheed CP2696-110C Calipers.

Note these 1980's original Lockheed calipers, Not the AP Racing CP2696. Pistons are slightly smaller.

Thanks in advance.

Adrian

Big Fluff · #2 PostAuthor: **Big Fluff** » Tue Mar 31, 2015 12:41 pm

Adrian.
Try here https://www.pegasusautoracing.com/keywo ... dButton=Go
I've used them a few times for parts for the Silver Saxon.

Also.... http://www.norvilmotorcycle.co.uk/
They have the following:
CP2055 PISTON - CALIPER - DEEP - TO FIT 063930 - NORVIL Â£18.69

61896 PISTON - CALIPER - FOR STANDARD CALIPER - CHROME Â£16.00

061896SS PISTON - CALIPER - FOR STANDARD CALIPER - STAINLESS STEEL Â£17.18

CP2195 PISTON - CALIPER - SHALLOW - TO FIT 063930 - NORVIL Â£18.69

CP2410102 PISTON - MASTER CYLINDER - 0.7" DIAMETER - FOR TWIN DISC Â£24.05

61898 PISTON - MASTER CYLINDER - FRONT - FITS ALL DISC BRAKES Â£11.67

999930SS PISTON - MASTER CYLINDER - REAR - MK3 ELECTRIC START - STAINLESS STEEL Call

Also, on eBay http://www.ebay.co.uk/itm/151629778883?rmvSB=true

Regs, Will

Hobbo · #3 PostAuthor: **Hobbo** » Tue Mar 31, 2015 3:59 pm

Adrian

Just got all my parts for cp2696 Lockheed from seals ect from Dave Trollope Racing they supply all you need fair prices as well . Also sell on ebay DTR

400871866445

PHIL

martinz1000r · #4 PostAuthor: **martinz1000r** » Tue Mar 31, 2015 4:26 pm

I 2nd DTR. Also try Andover Norton. If DTR dont have them Andover Norton will.

ADRIAN H · #5 PostAuthor: **ADRIAN H** » Tue Mar 31, 2015 4:41 pm

Thanks for the response.

I spoke to Andover Norton this morning and they said these particular calipers were standard fit on Triumph Bonneville T140V 1980 - 1983. However they have not got the correct parts. But with a bit of luck I should be able to find the parts I require.

I will take them out tonight and measure them as apparently there are two different depths they could be. I will phone around tomorrow they companies mentioned above, fingers crossed.

Thanks again. Adrian.

Hobbo · #6 PostAuthor: **Hobbo** » Tue Mar 31, 2015 5:00 pm

Adrian

DTR Have the pistons you need on ebay item no number

400890959833

PHIL

ADRIAN H · #7 PostAuthor: **ADRIAN H** » Tue Mar 31, 2015 6:42 pm

Hobbo wrote:Adrian

DTR Have the pistons you need on ebay item no number

400890959833

PHIL

thanks. Adrian.

I have just measured the brake pistons and they are 41.3mm diameter 1 no 20mm deep, other 17mm deep. Same as AP Racing CP2696 - happy days.

AP Lockheed CP2696-110C Calipers

AP Lockheed CP2696-110C Calipers

yo

yo

Re: yo

Who is online