one of Our Members has replaced the rotor and starter clutch on His Z1000A1
but since He has done so He says there is a terrible rattle in the engine
any ideas
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
rotor problems
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
paul doran
- Area Rep.
- Posts: 15910
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
rotor problems
way too many Zeds
Could be the rotor driving the starter motor due to the wrong thickness damper fitted behind the starter gear .
Or has maybe missed out one of the bronze thrust washers or neglected to tighten the three rotor bolts fully.
Or has maybe missed out one of the bronze thrust washers or neglected to tighten the three rotor bolts fully.
Last edited by zed1015 on Sun Feb 15, 2015 6:56 pm, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 18 guests