I've been trying to refit my air box and battery carrier on my Z900 A4 and have found I am missing a few bits, quite a few bits actually.
Anyone got :-
1/. Air box breather pipe 92059-124
2/. Air cleaner stay 32105-006
3/. Air cleaner cap 11012-070
4/. Inlet pipe holder 11040-001
5/. The left and right hand plate the above fixes to - 11040-002, and 11040-003
6/. Two of the damper rubbers for the battery case 92075-076, and two of the metal tubes/collars that go with them 92027-129.
Cheers
Richard
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Air box parts
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Air box parts
Somewhere, over a rainbow, weigh a pie.
1976 KZ900
1976 KZ900
- Bill Newman
- 100Club
- Posts: 459
- Joined: 27th May 2007
- Location: Ipswich
Hi Richard - when I did my KZ900 I had the same problem with airbox parts. The breather pipe is like hens teeth and expensive - here is an original:
http://www.ebay.co.uk/itm/KAWASAKI-NOS- ... 0688034198
but Taner at Z1Parts.net does a decent replica here:
http://www.ebay.co.uk/itm/200574380756? ... EBIDX%3AIT
Re the Air box cover, I may have one in the garage loft - I will have to get up there next week to put the Christmas decorations away and will have a look for you if you have not been sorted by then.
http://www.ebay.co.uk/itm/KAWASAKI-NOS- ... 0688034198
but Taner at Z1Parts.net does a decent replica here:
http://www.ebay.co.uk/itm/200574380756? ... EBIDX%3AIT
Re the Air box cover, I may have one in the garage loft - I will have to get up there next week to put the Christmas decorations away and will have a look for you if you have not been sorted by then.
Thank you Z1Bman, and Bill.
I have managed to find a UK supplier for the smaller bits, but the inlet pipe holder and the two plates they fix into seem to be made of unobtainium. I suppose I was hoping someone had all of it after converting to some other intake system.
Cheers anyway
Richard
I have managed to find a UK supplier for the smaller bits, but the inlet pipe holder and the two plates they fix into seem to be made of unobtainium. I suppose I was hoping someone had all of it after converting to some other intake system.
Cheers anyway
Richard
Somewhere, over a rainbow, weigh a pie.
1976 KZ900
1976 KZ900
Who is online
Users browsing this forum: No registered users and 7 guests