Hi All
I would be very greetful for info on jet sizes ( eg main jets, pilot jets, jet needle ,needle jets and air jet) for 29mm smoothbore carbs running standard airbox with 1015cc barrels on my 1975 Z1B. The sliders have a cut away of 2mm which is half a mill more than the standard Z1B sliders do you think this will be a problem and any info on float heights.
Thanks Glenn
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
29mm smoothbores on Z1B
Moderators: KeithZ1R, chrisu, paul doran, Taffus
smoothbores
Glenn
This should help-
main jet-120
air jet-.9
pilot jet-25
jet needle-5dl31-3 (middle)
needle jet-0.6
throttle valve-1.5
Any more info go to sudco.com
foz
This should help-
main jet-120
air jet-.9
pilot jet-25
jet needle-5dl31-3 (middle)
needle jet-0.6
throttle valve-1.5
Any more info go to sudco.com
foz
drink feck arse girls
Hi all
Thanks for the info, it was a great help.
I now need to no where i can obtain some Throttle valves 1.5 for the 29mm smoothbores as mine has 2.0 which suggests they came off a suzuki.
P S I sent an email to wiredgeorgetechstuff, are you supposed to send a donation at the same time or send it when you get a reply?
Hope some one can sort me out
Cheers Glenn
Thanks for the info, it was a great help.
I now need to no where i can obtain some Throttle valves 1.5 for the 29mm smoothbores as mine has 2.0 which suggests they came off a suzuki.
P S I sent an email to wiredgeorgetechstuff, are you supposed to send a donation at the same time or send it when you get a reply?
Hope some one can sort me out
Cheers Glenn
Who is online
Users browsing this forum: No registered users and 11 guests