Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Fork Oil to modified Z1000A1 with air assist mech

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
evans
100Club
100Club
Posts: 100
Joined: 30th Sep 2007
Location: Norfolk

Fork Oil to modified Z1000A1 with air assist mech

#1 PostAuthor: evans » Thu Sep 04, 2014 4:14 pm

All
I am now putting in the oil after fitting new fork oil seals, which has been a real problem as the bike is none standard and it has those strange caps with 1/2 inch square spigot recesses under the top caps. These could not be removed as too rusty, so having to put new oil in from the bottom, then replace allen bolts then refit to bike. It has larger diameter upper forks that standard with a gas assisted mechanism for pumping up. So does anyone know what these forks might from, as I am guessing the amount of fork oil will be different too to the 170cc specified.

Thanks

Chris
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Thu Sep 04, 2014 6:07 pm

photo.s would be a good start
Top
freddyz1r
Hardcore
Hardcore
Posts: 1351
Joined: 10th Mar 2013
Location: mansfield,nottinghamshire

#3 PostAuthor: freddyz1r » Fri Sep 05, 2014 9:32 am

"Gas assisted" ????
Chris, do they have the air valve + balance pipe ? Is it about 6" down (approximate) ?
As z1b man says a photo / photos might help???
I think the gt or gpz 550/750's had the 'air assistance' forks :?: :?: :?:
cheers freddy
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 12 guests