Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Warped carb body

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Z1Boy
100Club
100Club
Posts: 112
Joined: 5th May 2014
Location: Solihull, UK

Warped carb body

#1 PostAuthor: Z1Boy » Tue Jul 15, 2014 10:42 am

I have a spare set of 28mm carbs and a couple of the bodies have been warped just enough to bleed slightly at the float bowl gasket face.

Does anyone know if and how they can be gently straightened without busting the mazac type alloy shite?

Thanks
If at first you don't succeed, try and try again. Then quit. There's no point in being a damn fool about it.
W C Fields
Top
User avatar
KeithZ1R
Moderator
Posts: 3368
Joined: 15th May 2005
Location: Bury

#2 PostAuthor: KeithZ1R » Tue Jul 15, 2014 10:49 am

Just a thought but are you convinced it's the bowls and not one of the joiners only sayin cos I had the same thing drove me potty until I figured its was transferring from one of the two straight join pieces
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
User avatar
Z1Boy
100Club
100Club
Posts: 112
Joined: 5th May 2014
Location: Solihull, UK

#3 PostAuthor: Z1Boy » Tue Jul 15, 2014 2:52 pm

Thought of that, pretty sure its not that.

Hold the float chamber instu without a gasket and it rocks from the
corners where its warped. looks like the screws have been overtightened which has pulled the corners down.
If at first you don't succeed, try and try again. Then quit. There's no point in being a damn fool about it.

W C Fields
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#4 PostAuthor: chrisu » Tue Jul 15, 2014 3:03 pm

have you put a straight edge across them to see how bad they are ?
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#5 PostAuthor: PAULJAC47 » Tue Jul 15, 2014 4:20 pm

Couple of things to try, if its the bowls use a piece of glass and fine emery to flatten them using a circular motion,if you are sure its the bodies you may be able to use two gaskets and alter the float height slightly to compensate if its only a very small amount..Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1772
Joined: 12th Jun 2011
Location: Stewkley, Leighton Buzzard

#6 PostAuthor: Mark Tiller » Tue Jul 15, 2014 4:42 pm

heavy duty hylomar will cure it
Top
User avatar
Charlie
Custard Cream
Custard Cream
Posts: 773
Joined: 11th Jun 2011
Location: Sheffield
Contact:
Contact Charlie

#7 PostAuthor: Charlie » Tue Jul 15, 2014 4:43 pm

PAULJAC47 wrote:Couple of things to try, if its the bowls use a piece of glass and fine emery to flatten them using a circular motion,if you are sure its the bodies you may be able to use two gaskets and alter the float height slightly to compensate if its only a very small amount..Paul J


That's the way I would go too ^^
Why do I persist in debating with idiots ? I really should know better :)
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 17 guests