Easy I thought, the bikes been stood a while, so I removed carbs, cleaned the float valve.
Put some new fuel lines and fitted in line filters and I thought that would be the end of it. Nope still leaks only a few drips a minute but it bugs me.
Ok, plan B. Ordered a carb overhaul kit and fitted the new valve and seat. Just put it back together, guess what no difference..........
Any ideas/advice appreciated, I must be missing something.
Cheers
Its a 1000 a1
Nick
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Leaking from carb overflow only on number 2
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Float not upside down by any chance? or check the little brass pipe at float bottom these sometimes split letting fuel through....PaulJ
Or hole in float!!!!
Or hole in float!!!!
Last edited by PAULJAC47 on Mon Jun 23, 2014 7:25 pm, edited 1 time in total.
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Make a manomter to check fuel height from piece of clear tube,put float in petrol see if it leaks,ie sits lower than the others
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Hasbeen wrote:Do you mean the pipe in the bowl which attaches to the overflow?, not checked that
Yes see above as well
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-
steve bowdler
- Area Rep.
- Posts: 1793
- Joined: 20th Apr 2005
- Location: swansea s.wales
Hasbeen wrote:You guys are good. It seems the little brass pipe leaks, how does that happen?, I filled bowl with soapy water and blew up pie and bubbles!!
Whats the solution guys now please?
New bowl or i have had success with a fine blow torch and solder you will find there is a hairline split in the pipe,Glad to help Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
http://www.ebay.co.uk/itm/Brass-Tubes-2 ... 53f042efb0
just twist the brass tube with some pliers & it should come out
just twist the brass tube with some pliers & it should come out
Who is online
Users browsing this forum: No registered users and 19 guests