Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Headlight

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

Headlight

#1 PostAuthor: scott » Tue Jun 03, 2014 7:16 am

My MOT tester has stated that my headlight is a european one and not a uk one....beam points the wrong way. Would anyone have a uk headlight for sale? Does anyone have a link to one? Another challenge for Z1bman??

I've been told this would do:

http://www.ebay.co.uk/itm/Classic-Mini- ... 663wt_1399

Any comments?

User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

#2 PostAuthor: scott » Wed Jun 04, 2014 7:07 am

I can't believe there are no answers from anyone on here :roll:

User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#3 PostAuthor: mick znone » Wed Jun 04, 2014 7:10 am

would zpower not ham the lens for sale then you would only have to swap that over?
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence

User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

#4 PostAuthor: scott » Wed Jun 04, 2014 7:15 am

Hi Mick, Zpower say they are no longer available and are quite rare but did mention something about mini headlights, so I thought someone here may know something, obviously not the case then

User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

Re: Headlight

#5 PostAuthor: z1bman » Wed Jun 04, 2014 8:49 am

scott wrote:My MOT tester has stated that my headlight is a european one and not a uk one....beam points the wrong way. Would anyone have a uk headlight for sale? Does anyone have a link to one? Another challenge for Z1bman??

I've been told this would do:

http://www.ebay.co.uk/itm/Classic-Mini- ... 663wt_1399

Any comments?



if your not bothered about originality then the wipac ones should be perfectly ok & be a slight improvement on the original

User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

#6 PostAuthor: scott » Wed Jun 04, 2014 8:54 am

Z1bman, thanks for the response. It's good to know that the wipac one will keep an MOT tester happy.

martinz1000r
Custard Cream
Custard Cream
Posts: 955
Joined: 1st Jul 2007
Location: Oxfordshire

#7 PostAuthor: martinz1000r » Wed Jun 04, 2014 8:56 am

What bike? I have a rectangular J/ELR/GPz spare. If looking for round i do have a couple but not sure what from. Give me the diameter and i'll measure. They are complete units removed from my Harris and Z900 but they are not original Z parts. Will get you through an MOT though!
Z1000R, Moto Martin, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, Yamaha YZF750SP, SP1 Hoonda, Katana 1100, Bimota SB6R

User avatar
steve bowdler
Area Rep.
Area Rep.
Posts: 1793
Joined: 20th Apr 2005
Location: swansea s.wales

#8 PostAuthor: steve bowdler » Wed Jun 04, 2014 9:03 am


User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

#9 PostAuthor: scott » Wed Jun 04, 2014 9:06 am

Martin thanks for the offer, it did pass an MOT and he did state that he sees a few like it. So I thought I would start looking into alternatives. I would very much like to stay original but sourcing one is going to prove difficult, maybe, not fully tried to find one yet. So I may come back to you on this one.

User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

#10 PostAuthor: scott » Wed Jun 04, 2014 9:08 am

Thanks very much Steve.....more data for me to chew over...could be better than the wipac one, maybe

Chris Riv
100Club
100Club
Posts: 176
Joined: 15th Jun 2006

#11 PostAuthor: Chris Riv » Wed Jun 04, 2014 9:55 am

Scott, any 7" standard light unit will do the job. I just got some from ebay such as item number 160955551450. They are a bit flatter than the standard item so leave a bit more room for wiring & connectors etc. Passed mot ok but I havent rode in the dark yet! Comes with pilot light & rubber cover for the back (although i didnt use the cover).
Hope this helps
Cheers Chris

User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

#12 PostAuthor: scott » Wed Jun 04, 2014 12:01 pm

Thanks Chris, that does help.
PS. Very happy with the clocks mate, thanks.

Martin, it's for a z1000a2

User avatar
steve.w
ZedHead
ZedHead
Posts: 1156
Joined: 28th Jul 2008

#13 PostAuthor: steve.w » Wed Jun 04, 2014 5:00 pm

ive got a 7 inch one off a z750 ??

User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

#14 PostAuthor: scott » Wed Jun 04, 2014 7:57 pm

Steve.w, is it a uk spec headlight?

User avatar
steve.w
ZedHead
ZedHead
Posts: 1156
Joined: 28th Jul 2008

#15 PostAuthor: steve.w » Thu Jun 05, 2014 6:49 am

scott wrote:Steve.w, is it a uk spec headlight?
yes mate


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 6 guests