Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

VM26SS Throttle slides

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Mowjoe
100Club
100Club
Posts: 122
Joined: 30th Jan 2014
Location: Newbury UK

VM26SS Throttle slides

#1 PostAuthor: Mowjoe » Sat Mar 08, 2014 5:43 am

Is it an easy task to remove the slides in these Z900 carbs as I want to check the needle positions. Any help appreciated!

My Haynes manual has let me down again!! :roll:
Z900-A4 looking like a Z1B!
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#2 PostAuthor: Ginger Bear » Sat Mar 08, 2014 8:28 am

You just need to remove the carb tops, then the shaft that connects them all together, then they're out.

Be careful undoing the small screws down inside the slide that keep the needle retained, they are soft!
I give them a sharp tap (screwdriver & hammer) and keep the pressure on the screwdriver whilst giving them a sharp twist. Hopefully that'll work for you as well.
Image

# 104

Phil Churchett Award Winner 2011 & 2016 :D
Buzzworkz Best Modified Zed 2016
Top
User avatar
Mowjoe
100Club
100Club
Posts: 122
Joined: 30th Jan 2014
Location: Newbury UK

#3 PostAuthor: Mowjoe » Sat Mar 08, 2014 8:46 am

Thanks for your reply GB

Can this be done with carbs fitted or take them off?
Z900-A4 looking like a Z1B!
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#4 PostAuthor: Ginger Bear » Sat Mar 08, 2014 9:33 am

Working around those top frame tubes will be a real ball ache, if possible at all. But refitting the carbs if you have airbox rubbers will also be a ball ache.....

If you use individual filters (K&N etc) I'd have the carbs off. [/u][/i]
Image



# 104



Phil Churchett Award Winner 2011 & 2016 :D

Buzzworkz Best Modified Zed 2016
Top
User avatar
Mowjoe
100Club
100Club
Posts: 122
Joined: 30th Jan 2014
Location: Newbury UK

#5 PostAuthor: Mowjoe » Sat Mar 08, 2014 11:08 am

Airbox rubbers newish and still supple so will have a go tomorrow maybe.

Thanks GB

:D
Z900-A4 looking like a Z1B!
Top
User avatar
Z1parR
Hardcore
Hardcore
Posts: 4901
Joined: 11th Oct 2009
Location: Chorley Lancs

#6 PostAuthor: Z1parR » Sat Mar 08, 2014 7:51 pm

As GB said , the screws are soft .
Try a few different Phillips screwdrivers until you get best fit .
0172 . Geoff Parr
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 24 guests