Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000R fork internals - parts needed!!!

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
martinz1000r
Custard Cream
Custard Cream
Posts: 955
Joined: 1st Jul 2007
Location: Oxfordshire

Z1000R fork internals - parts needed!!!

#1 PostAuthor: martinz1000r » Sat Nov 16, 2013 4:10 pm

Just changing my leaking fork seals. Whilst apart I spotted a couple of parts are missing. Anyone got any old forks or bits of internals lying around?

The bits i need are the large washers that sit on top of the springs 44028 in the diagram and the conical piece at the bottom of the damper rod. See picture below:

Image

Can anyone help?
Z1000R, Moto Martin, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, Yamaha YZF750SP, SP1 Hoonda, Katana 1100, Bimota SB6R
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#2 PostAuthor: Garn 1 » Sun Nov 17, 2013 3:31 am

MatinZ, If it's a Z1R (Not sure about an ELR) then you often find the top washer missing, Don't worry too much about it, just put a normal washer in.
The conical piece must be there otherwise you could not assemble them., It may be jammed in the bottom and you just can't see it. Pretty hard to get if you have lost it! The Z1 thru to the Z1R are much the same!
Get you components side by side from each leg and take a photo.
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
martinz1000r
Custard Cream
Custard Cream
Posts: 955
Joined: 1st Jul 2007
Location: Oxfordshire

#3 PostAuthor: martinz1000r » Sun Nov 17, 2013 10:38 am

Is it the bit of the damper that the bolt goes in to? Is it just that exploded diagram that is confusing me?
Z1000R, Moto Martin, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, Yamaha YZF750SP, SP1 Hoonda, Katana 1100, Bimota SB6R
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#4 PostAuthor: z1bman » Sun Nov 17, 2013 10:48 am

fork spring washers 44028-1004 available from from cradley
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#5 PostAuthor: z1bman » Sun Nov 17, 2013 11:07 am

http://www.ebay.co.uk/itm/221317817525? ... 1423.l2649

http://www.ebay.co.uk/itm/400499572663? ... 1423.l2649
Top
martinz1000r
Custard Cream
Custard Cream
Posts: 955
Joined: 1st Jul 2007
Location: Oxfordshire

#6 PostAuthor: martinz1000r » Sun Nov 17, 2013 2:34 pm

z1bman wrote:http://www.ebay.co.uk/itm/221317817525?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

http://www.ebay.co.uk/itm/400499572663? ... 1423.l2649


Based on part numbers on Kawasaki.com the Z1000R fork internals are unique to that model. These would not be right but thanks for suggesting.
Z1000R, Moto Martin, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, Yamaha YZF750SP, SP1 Hoonda, Katana 1100, Bimota SB6R
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#7 PostAuthor: z1bman » Sun Nov 17, 2013 4:21 pm

the internals are different but the aluminium cup on the end of the damper rod are very similar in looks + dimensions
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#8 PostAuthor: chrisu » Sun Nov 17, 2013 5:25 pm

if you really don't have the conical ally bits i've got some Z1R ones you can try to see if they suit - give me a PM.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests