Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

COMPRESSION RINGS- INSIDE BEVEL UP

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
RGH
100Club
100Club
Posts: 453
Joined: 16th May 2009
Location: Mandurah Western Australia

COMPRESSION RINGS- INSIDE BEVEL UP

#1 PostAuthor: RGH » Fri Oct 11, 2013 1:03 pm

I.m confused, new aftermarket rings for Z1000 70mm, both are marked top, one is shiney no inside or outside bevel, other is black/blue with inside bevel and marked top on bevel side.

So does ring with inside bevel (facing up as marked top) go on top groove or second.
Top
RGH
100Club
100Club
Posts: 453
Joined: 16th May 2009
Location: Mandurah Western Australia

#2 PostAuthor: RGH » Fri Oct 11, 2013 1:23 pm

My understanding is shiney ring is always top ring, also inside bevel is always top ring as to promote positive twist. (when marked top)

Yet the Clymer manual shows inside bevel facing up on 2nd groove, under 1000 in pic centre left.

Image
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#3 PostAuthor: zed1015 » Fri Oct 11, 2013 2:29 pm

Chrome ring is the top one .
Plain iron one is the second.
Top
User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2708
Joined: 1st Mar 2007
Location: Aston, Cheshire

#4 PostAuthor: Big Fluff » Fri Oct 11, 2013 8:49 pm

Yes, shiny ring on top.
The ring with the bevel/step on the inside goes bevel/step side facing upwards.
A note.. Some early zeds (72/73) had the bevel facing downwards (gen kawa rings only) which threw a lot of zed enthusiasts into total confusion. Nowadays even rings for those early zeds that are not genuine nos should also be fitted with the bevel facing upwards.
Kawasaki H2C 750, ZRX1100R, H**** VF1000RG Rothmans, H**** VF500F2F, Suzuki GSXR750F Slabbie
Top
User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2708
Joined: 1st Mar 2007
Location: Aston, Cheshire

#5 PostAuthor: Big Fluff » Fri Oct 11, 2013 8:49 pm

Yes, shiny ring on top.
The ring with the bevel/step on the inside goes bevel/step side facing upwards.
A note.. Some early zeds (72/73) had the bevel facing downwards (gen kawa rings only) which threw a lot of zed enthusiasts into total confusion. Nowadays even rings for those early zeds that are not genuine nos should also be fitted with the bevel facing upwards.
Kawasaki H2C 750, ZRX1100R, H**** VF1000RG Rothmans, H**** VF500F2F, Suzuki GSXR750F Slabbie
Top
RGH
100Club
100Club
Posts: 453
Joined: 16th May 2009
Location: Mandurah Western Australia

#6 PostAuthor: RGH » Sat Oct 12, 2013 3:46 am

Big Fluff wrote:
A note.. Some early zeds (72/73) had the bevel facing downwards (gen kawa rings only) which threw a lot of zed enthusiasts into total confusion. Nowadays even rings for those early zeds that are not genuine nos should also be fitted with the bevel facing upwards.


Thankz Rob and Will.

Above is answer to the bit that threw me, always thought inside bevel faced down on second ring.

Correct me if wrong, l,ve seen rings with inside bevel face up on top groove?
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 11 guests