While the original arm was off my Z1R yesterday, I offered the Metmachex arm up and found the pivot was about 5mm too narrow to fit the Z1R. I've measured it at 226mm (roughly). There's no marking on the Metmachex arm to indicate what it might fit.
When I bought it, I was told it was for a Z650 / Z900 / Z1000, so assumed (now there's a word at the centre of most *uck-ups) it would fit.
From the photos, its clearly for a twin shock bike, has mounts for the brake torque arm on both the upper and lower side of the RHS, which may indicate its for a bike that has either a drum or disc rear brake. Any ideas?
[img][img]http://i1273.photobucket.com/albums/y413/FredtheZed/SwingArm1_zps21e9208c.jpg[/img]
[/img]
[img][img]http://i1273.photobucket.com/albums/y413/FredtheZed/SwingArm2_zpsd55193ff.jpg[/img]
Any ideas??
Fred[/img]
![[img]http://i1273.photobucket.com/albums/y413/FredtheZed/SwingArm1_zps21e9208c.jpg[/img]](http://s1273.photobucket.com/user/FredtheZed/media/SwingArm1_zps21e9208c.jpg.html){kind=link}
![[img]http://i1273.photobucket.com/albums/y413/FredtheZed/SwingArm2_zpsd55193ff.jpg[/img]](http://s1273.photobucket.com/user/FredtheZed/media/SwingArm2_zpsd55193ff.jpg.html){kind=link}