Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

head choice

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
tightwad
Regular Poster
Posts: 44
Joined: 13th May 2013
Location: chesterfield

head choice

#1 PostAuthor: tightwad » Tue Jul 16, 2013 7:30 pm

hi all, hope somebody could give me an answer to my query, what cylinder head will fit or is the same one off a different model, mine is a 78 z1000a2, a previous owner managed to crack it, looks like its been welded/ liquid metal repair, seems to be a very slight weep,nowt major yet besause i havent been on the road with it yetImage
Top
garyd
Hardcore
Hardcore
Posts: 2558
Joined: 11th Jun 2011
Location: West of London

#2 PostAuthor: garyd » Tue Jul 16, 2013 8:44 pm

Pretty sure the Z900 z1000 & MkII are a straight swap.

Not sure about the Z1b and previous as they might have different rubber seals around the camchain.

But you can make them fit....you can even make the GPz11 head fot if you want a bit of performance.
Last edited by garyd on Fri Jul 19, 2013 9:19 pm, edited 1 time in total.
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#3 PostAuthor: zed1015 » Tue Jul 16, 2013 9:15 pm

Any head from the first Z1 up to the z1r and mk2/ST will bolt straight on.
Later J/GPZ heads will fit with idler conversion.
Top
User avatar
andyb1962
Hardcore
Hardcore
Posts: 1777
Joined: 23rd Sep 2011
Location: Sheffield/Rotherham South yorks

#4 PostAuthor: andyb1962 » Wed Jul 17, 2013 8:14 am

Z1 to Z1R should fit
Andy :wink:


"The greatest trick the devil ever pulled was convincing the world he didnt exist"
Top
User avatar
ZedHead
Hardcore
Hardcore
Posts: 1950
Joined: 9th May 2009
Location: North Yorkshire
Contact:
Contact ZedHead

#5 PostAuthor: ZedHead » Wed Jul 17, 2013 9:11 am

get your old head properly welded by a reputable person. cheaper than a new head and hard to see the repair
Top
tightwad
Regular Poster
Posts: 44
Joined: 13th May 2013
Location: chesterfield

#6 PostAuthor: tightwad » Fri Jul 19, 2013 6:14 pm

thanks for the quick replys, takes the guess work out for me :D
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 18 guests