Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Coils heating up ?

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
User avatar
Vendetta761
100Club
100Club
Posts: 254
Joined: 3rd Feb 2013
Location: Bristol

Coils heating up ?

#1 PostAuthor: Vendetta761 » Thu Jul 11, 2013 11:17 am

sorry all, i have tried searching the forum but i cannot find the thread I read recently about someone having trouble with their coils.
My new acquisition from ebay ,VZ-ST, is not starting so I have swapped over carbs from Olive and now the kill swithc which was broken /damaged .
Still no start so thought about swapping the coils from Olive and whilst i was doing this i forgot to turn the ignition off on VZ, 10 mins later, came back to the bike and the coils were hot hot HOT and the battery drained.....

Any ideas ?
Z1000 ST x 3 , Moto Guzzi G5 special ,V11 special.

User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Thu Jul 11, 2013 11:32 am

you should not leave the ignition in the on position for more than a couple of minutes as to your cost it will overheat the coils + damage the internal windings. bike should be running or turn of the kill switch if you need the ignition on for long periods

User avatar
Vendetta761
100Club
100Club
Posts: 254
Joined: 3rd Feb 2013
Location: Bristol

#3 PostAuthor: Vendetta761 » Thu Jul 11, 2013 12:23 pm

Roger that, Thank you !
Z1000 ST x 3 , Moto Guzzi G5 special ,V11 special.

User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#4 PostAuthor: Pigford » Thu Jul 11, 2013 3:05 pm

Old kawasaki kill switches can be a real PITA - they short out for a pastime :??
And on the 7th day... Zeds were created!

User avatar
Taffus
Moderator
Posts: 4159
Joined: 30th Aug 2007
Location: .21 club

#5 PostAuthor: Taffus » Thu Jul 11, 2013 5:46 pm

Pigford wrote:Old kawasaki kill switches can be a real PITA - they short out for a pastime :??

er that's their job Mark, they provide the earth for the ignition system, you break the path to earth to kill the engine :roll:
(\__/)
(='.'=)
(")_(")Image

User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#6 PostAuthor: Garn 1 » Thu Jul 11, 2013 10:55 pm

Fill up battery and recharge. Coils should survive a bit of over heat. If you have contact points they will need attention.
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4

User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#7 PostAuthor: Pigford » Fri Jul 12, 2013 7:47 am

Taffus wrote:
Pigford wrote:Old kawasaki kill switches can be a real PITA - they short out for a pastime :??

er that's their job Mark, they provide the earth for the ignition system, you break the path to earth to kill the engine :roll:


Very droll :| Only good if you have full control over that action :shock: The inner workings tend to corrode & short over time :!:
And on the 7th day... Zeds were created!


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 12 guests