Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

tyres

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
hillbilly
Hardcore
Hardcore
Posts: 2337
Joined: 31st Jan 2008
Location: lancashire

tyres

#1 PostAuthor: hillbilly » Sat Jun 28, 2008 8:48 am

would any one be able to tell me what size tyre will go in a metmachex swing arm on z900.(width wise)i have a 120 in now ,but whant to put maybe a 160 in,any help would be more than i got now. :??
push me shuv you.sez who sez me.
owing p.u.m. (76 z1b)(v reg z1r)
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 3992
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#2 PostAuthor: london calling » Sat Jun 28, 2008 4:02 pm

Depends on the width of your wheel.
More harm than good with over-tyring ?? a narrow rim
Jack
Top
User avatar
hillbilly
Hardcore
Hardcore
Posts: 2337
Joined: 31st Jan 2008
Location: lancashire

#3 PostAuthor: hillbilly » Sat Jun 28, 2008 8:00 pm

its got a disc on back,think off a z1000,normal size for them models i suppose.
push me shuv you.sez who sez me.

owing p.u.m. (76 z1b)(v reg z1r)
Top
User avatar
Jumbo
Custard Cream
Custard Cream
Posts: 697
Joined: 9th Jan 2005
Location: Devon

Re: tyres

#4 PostAuthor: Jumbo » Sat Jun 29, 2013 8:59 pm

hillbilly wrote:would any one be able to tell me what size tyre will go in a metmachex swing arm on z900.(width wise)i have a 120 in now ,but whant to put maybe a 160 in,any help would be more than i got now. :??


Does anyone know the answer to this question as I will be having my wheels built up this week hopefully. I will have a 3.5 rim on the back and thinking about either 150 or 160 tyre ?
LE to JOG on a z900

P.U.M.
Top
User avatar
Jay1969
Hardcore
Hardcore
Posts: 4260
Joined: 26th Feb 2013
Location: East Midlands, England.
Contact:
Contact Jay1969

#5 PostAuthor: Jay1969 » Sat Jun 29, 2013 9:37 pm

Most I got without offset front sprocket with safe clearance was a 140x18, on a JMC monoshock conversion
swinger that was designed to fit standard wheel and swingarm pivot for '76 z900
So assuming the Metmachex is same width points all round to standard z900,
you'd be safe with a 140...
But most you could go is 180mm with 5/8th offset front sprocket (from Debbens / Z-Power)
with a modded swinger.
Last edited by Jay1969 on Sat Jul 13, 2013 10:05 am, edited 1 time in total.
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 3992
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#6 PostAuthor: london calling » Sun Jun 30, 2013 5:33 am

3.5" rim width is fine for a 140/70 x 18 rear tyre.
You might get a 150 on there :??
Pointless over-tyreing ?? a rim as you usually get less contact patch with the tyre and often affects handing.
Jack
Top
User avatar
Jay1969
Hardcore
Hardcore
Posts: 4260
Joined: 26th Feb 2013
Location: East Midlands, England.
Contact:
Contact Jay1969

#7 PostAuthor: Jay1969 » Sun Jun 30, 2013 7:48 pm

Jay1969 wrote:Most I got without offset front sprocket with safe clearance was a 140x18, on a JMC monoshock conversion
swinger that was designed to fit standard wheel and swingarm pivot for '76 z900
So assuming the Metmachex is same width points all round to standard z900,
you'd be safe with a 140...
But most you could go is 180mm with 5/8th offset front sprocket (from Debbens / Z-Power)
with a modded swinger.

Wheels I had front and rear were CMA 3 spoke cast ally made to order rims
and were 4" wide on the rear, with the 140mm, forgot to add :wink:
For a 180 width, not that you want one, but just for reference: 5.5" rim.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 17 guests