Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
K&N type Engine breather
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Rick,
Only problem I had was fitting one too low, with an APE breather cover without baffles.
It was fine whilst taking things steady, but once I gave it 'the beans' the oil couldn't get out fast enough.
Solved the problem by fitting a taller pipe, similar to the one in your pic.
Only problem I had was fitting one too low, with an APE breather cover without baffles.
It was fine whilst taking things steady, but once I gave it 'the beans' the oil couldn't get out fast enough.
Solved the problem by fitting a taller pipe, similar to the one in your pic.
# 104
Phil Churchett Award Winner 2011 & 2016
Buzzworkz Best Modified Zed 2016
-
firyembers
- Custard Creem
- Posts: 223
- Joined: 11th Jun 2011
- Location: Back And Loving Life In Cardiff
did the same with a halfords filter,but dropped a ball bearing in like t section pipe to act as a one way valve to help solidify oil mist back to chamber.
Not sure yet if its helping with my total oil loss i seem to be having,as it was an open air system prior
Not sure yet if its helping with my total oil loss i seem to be having,as it was an open air system prior
Life shouldn't be a journey to the grave with the intention of arriving safely in a well-preserved body, but rather to skid in sideways, cigar in one hand, beer in the other, body used up, totally worn-out and screaming, "WOO HOO, what a ride!"
Who is online
Users browsing this forum: No registered users and 20 guests