Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
I'm not too sure ill be liked around here............
Moderators: KeithZ1R, chrisu, paul doran, Taffus
That's one helluva great way to start an engine re-build.
Reminds me of what i did with mine about six odd years ago and then made the mistake of painting it.
Because its so clean when i bit of paint does chip off it looks like a spot light shining through from inside.
I wished i had just coated it in ACF50 and left it alone but being a J dictated it must be black and satin black at that. Probably one of my less well thought through decisions.
Gloss would have been a better choice in hindsight because satin shows up every mark and bit of dirt but there it is.
AL
Reminds me of what i did with mine about six odd years ago and then made the mistake of painting it.
Because its so clean when i bit of paint does chip off it looks like a spot light shining through from inside.
I wished i had just coated it in ACF50 and left it alone but being a J dictated it must be black and satin black at that. Probably one of my less well thought through decisions.
Gloss would have been a better choice in hindsight because satin shows up every mark and bit of dirt but there it is.
AL
1981 J1
-
Anuar Kamaruddin
- Regular Poster
- Posts: 64
- Joined: 8th Aug 2011
- Location: Kuala Lumpur,Malaysia
Ok folks, I'm all moved in in Brisbane, house is setup, ikea flat packs all build and just got back from recycling all the boxes!
Now to set up my shed FINALY I HAVE A FUCKEN SHED!!!!!! Fuck yeah!
I rounded up all the bike and threw her together for a looksy, hopefully now everyone can understand my insane plan....
Now to set up my shed FINALY I HAVE A FUCKEN SHED!!!!!! Fuck yeah!
I rounded up all the bike and threw her together for a looksy, hopefully now everyone can understand my insane plan....
-
Is Vic There
- Hardcore
- Posts: 1460
- Joined: 8th Nov 2011
- Location: Brisbane, Australia.
Where abouts in Brisbane are you?
How are you going to get the bike rego'd?
How are you going to get the bike rego'd?
Z1000R ELR, Z1100R ELR, GPz900R A1, GPz750 Turbo, Norton F1, Harris Mag 2, Harris Mag 5, Yamaha YZR750SP, Triumph Steve McQueen, Suzuki RGV250 Sheene Rep, Suzuki RG500 Walter Wolf, Suzuki RG250 Walter Wolf, Aprilia RS250, Yamaha YL1, RG500. H**** NS400.
-
Flying Tiger
- Ted's Biatch
- Posts: 238
- Joined: 11th Jun 2011
- Location: Bury St Edmunds
What an awesome looking stance! Look forward to seeing progress!
Flying Tiger Paintwork - www.facebook.com/FlyingTigerPaintwork - flyingtigerpaintwork@hotmail.co.uk - 07796693751
-
Is Vic There
- Hardcore
- Posts: 1460
- Joined: 8th Nov 2011
- Location: Brisbane, Australia.
I work in Yatala, two minutes away, pop in mate!
Send me a pm and we can go from there, what bike shop are you wiring at?
Vic
Send me a pm and we can go from there, what bike shop are you wiring at?
Vic
Z1000R ELR, Z1100R ELR, GPz900R A1, GPz750 Turbo, Norton F1, Harris Mag 2, Harris Mag 5, Yamaha YZR750SP, Triumph Steve McQueen, Suzuki RGV250 Sheene Rep, Suzuki RG500 Walter Wolf, Suzuki RG250 Walter Wolf, Aprilia RS250, Yamaha YL1, RG500. H**** NS400.
RIGHT!!!! Ripped into my engine today,
I'm pretty happy with what I have found, the head is in great condition, I reckon a valve grind and clean and it's done.
The barrels need a bit of work, I can still see the hone marks but however long sitting idle has produced some surface rust,
I may get away with just a hone but I need to look at them a bit more:
But no scores or burn marks! Yay!!!!
Cyl 1:
Cyl 2:
Cyl 3:
Cyl 4:
The slugs look good!
The rods are tight as (insert dirty pun here)
Overall very happy with my $300 engine.
If anyone has any info on the marking on the slugs or rods please let me know.
I'm pretty happy with what I have found, the head is in great condition, I reckon a valve grind and clean and it's done.
The barrels need a bit of work, I can still see the hone marks but however long sitting idle has produced some surface rust,
I may get away with just a hone but I need to look at them a bit more:
But no scores or burn marks! Yay!!!!
Cyl 1:
Cyl 2:
Cyl 3:
Cyl 4:
The slugs look good!
The rods are tight as (insert dirty pun here)
Overall very happy with my $300 engine.
If anyone has any info on the marking on the slugs or rods please let me know.
-
Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Who is online
Users browsing this forum: No registered users and 12 guests