Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Harris KR1000 ish

Work in Progress

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
big green bus
Custard Cream
Custard Cream
Posts: 962
Joined: 2nd Apr 2006
Location: durham

#16 PostAuthor: big green bus » Wed Feb 13, 2013 7:38 pm

Got the bike back from the tuners. He told me he did not know how it was running. I had put the wrong timing ATU on with the totally wrong advance on (god knows how I ended up with it in the first place). He was also unable to run the bike on the dyno as the alternator magnets had fallen off causing the bike to vibrate, but he did manage to get the carb's sorted so few small jobs and it will ready for the spring (not the spring sale steve :roll: )
Top
User avatar
paul doran
Area Rep.
Area Rep.
Posts: 15910
Joined: 24th Sep 2004
Location: near Dublin Ireland

#17 PostAuthor: paul doran » Wed Feb 13, 2013 8:12 pm

Steve it looks ace Mate
way too many Zeds
Top
jphaynes669
Hardcore
Hardcore
Posts: 1435
Joined: 24th Jun 2012
Location: Northants

#18 PostAuthor: jphaynes669 » Wed Feb 13, 2013 8:37 pm

Well done, absolutely stunning, both of them. :P
Jeff.H
Top
Toyboy
Regular Poster
Posts: 70
Joined: 12th Jan 2013
Location: Essex

#19 PostAuthor: Toyboy » Thu Feb 14, 2013 4:33 pm

KooL :D
Top
User avatar
steve.w
ZedHead
ZedHead
Posts: 1156
Joined: 28th Jul 2008

#20 PostAuthor: steve.w » Thu Feb 14, 2013 6:37 pm

big green bus wrote:Got the bike back from the tuners. He told me he did not know how it was running. I had put the wrong timing ATU on with the totally wrong advance on (god knows how I ended up with it in the first place). He was also unable to run the bike on the dyno as the alternator magnets had fallen off causing the bike to vibrate, but he did manage to get the carb's sorted so few small jobs and it will ready for the spring (not the spring sale steve :roll: )
faultless mate u using ya spell checker :twisted:
Top
yantosh
Regular Poster
Posts: 57
Joined: 27th Jan 2013
Location: paisley
Contact:
Contact yantosh

#21 PostAuthor: yantosh » Thu Feb 14, 2013 6:55 pm

Harris is stunning
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#22 PostAuthor: Pigford » Thu Feb 14, 2013 7:01 pm

Steve, have you got any decent photo's of how the lower rear engine mounts are fixed on that HARRIS pleeze matey :?:
And on the 7th day... Zeds were created!
Top
User avatar
big green bus
Custard Cream
Custard Cream
Posts: 962
Joined: 2nd Apr 2006
Location: durham

#23 PostAuthor: big green bus » Fri Feb 15, 2013 6:47 pm

no problem matey, i can get a lower mount made for the gpz motor if you get stuck
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#24 PostAuthor: Pigford » Fri Feb 15, 2013 7:02 pm

big green bus wrote:no problem matey, i can get a lower mount made for the gpz motor if you get stuck


Ace :P

A photo may do as I have a decent "J" motor laying around and wondered what the arrangement is : as there ain't a lower rear mounting point on the J-motor :?:
And on the 7th day... Zeds were created!
Top
nick pearce
100Club
100Club
Posts: 266
Joined: 28th Feb 2009
Location: Gloucester

Harris Z1000.

#25 PostAuthor: nick pearce » Fri Feb 15, 2013 7:10 pm

Love the bike- the swingarm is very similar to a JMC deep braced one I have just bought for an LC Hybrid. Those wheels in the background look like f2 ypvs ones. Oh love the 650 aswell. Cheers Nick.
N Pearce
Top
User avatar
big green bus
Custard Cream
Custard Cream
Posts: 962
Joined: 2nd Apr 2006
Location: durham

Re: Harris Z1000.

#26 PostAuthor: big green bus » Fri Feb 15, 2013 9:07 pm

nick pearce wrote:Love the bike- the swingarm is very similar to a JMC deep braced one I have just bought for an LC Hybrid. Those wheels in the background look like f2 ypvs ones. Oh love the 650 aswell. Cheers Nick.

well spotted. the wheels are off an LC125 I got for my son, but it has taken so long to get my finger out he passed his test and now runs a z440 ltd and the LC is still not done :oops: ( the engine mount uses the the sump exhaust mounts)
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#27 PostAuthor: Pigford » Sat Feb 16, 2013 7:43 am

Ahhhhh, that makes sense - Thanx Steve :P
And on the 7th day... Zeds were created!
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#28 PostAuthor: Rich » Sat Feb 16, 2013 9:49 am

originally magnum frames for the later motors had lower frame tubes tying the front upper and lower mount in to the bottom rear
Rich
 diplomacy is a form of art - I was never any good at art
Top
User avatar
big green bus
Custard Cream
Custard Cream
Posts: 962
Joined: 2nd Apr 2006
Location: durham

#29 PostAuthor: big green bus » Sun Feb 17, 2013 7:35 am

Found the problem
[img][img]http://i150.photobucket.com/albums/s82/worringtonminge/kr1000012_zpsc5b7d910.jpg[/img]
replaced it, but now the starter clutch is slipping so back off again, thinking about changing the pipe too.
[/img]Image
[img][img]http://i150.photobucket.com/albums/s82/worringtonminge/kr1000010_zps64decbdf.jpg[/img]
[/img]Image
Top
User avatar
steve.w
ZedHead
ZedHead
Posts: 1156
Joined: 28th Jul 2008

#30 PostAuthor: steve.w » Sun Feb 17, 2013 8:46 am

nice 206 :wink:
Top
Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 3 guests