Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z900 SWING ARM PIVOT WIDTH

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
london calling
Hardcore
Hardcore
Posts: 3992
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

Z900 SWING ARM PIVOT WIDTH

#1 PostAuthor: london calling » Thu Jan 24, 2013 6:46 am

What is the swing arm pivot width for a Z900 :?:
Also is this the same for the Z1000 models including Z1R and MK.2 :?:
Jack
Top
LondonZ1
100Club
100Club
Posts: 203
Joined: 20th Nov 2011
Location: London

#2 PostAuthor: LondonZ1 » Thu Jan 24, 2013 8:47 am

Jack, I can measure mine tonight if you don't get an answer before then. I know that the Z900 pivot width is the same as the Z1/A/B as the same sanctuary arm fits both Z1 and Z900.
Top
User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1729
Joined: 1st Sep 2007
Location: Leicestershire

#3 PostAuthor: KWACKERZ1 » Thu Jan 24, 2013 8:48 am

234mm for z1000a1 and MK2 Pretty sure z900 is the same as I have swapped dresda swing arms between 900's and 1000's.
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#4 PostAuthor: zed1015 » Thu Jan 24, 2013 5:25 pm

It is more often than not 235mm between the frame bosses.
I have four frames here all 235mm.
Never had a straight frame vary by more than half a mill .
Top
User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1729
Joined: 1st Sep 2007
Location: Leicestershire

#5 PostAuthor: KWACKERZ1 » Thu Jan 24, 2013 7:18 pm

I would concur with Rob i put that in from memory today but checking mine Robs right 235.
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 3992
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#6 PostAuthor: london calling » Thu Jan 24, 2013 9:49 pm

Many thanks ladz,most appreciated :wink:
Jack
Top
User avatar
KeithZ1R
Moderator
Posts: 3368
Joined: 15th May 2005
Location: Bury

#7 PostAuthor: KeithZ1R » Thu Jan 24, 2013 9:58 pm

Z1R/1000 230mm without end caps across the swing arm tube 235 inside between the frame boss's
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 20 guests