Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Engine Mounting Plate Misalignment

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
KeithZ1R
Moderator
Posts: 3368
Joined: 15th May 2005
Location: Bury

#16 PostAuthor: KeithZ1R » Mon Jan 07, 2013 10:30 pm

Z1parR wrote:I've a bracket 58mm downtube centres and 62mm downtube to engine centre .



Thats close enough
:lol:
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
User avatar
chrisNI
Site Admin
Posts: 2316
Joined: 22nd Dec 2001
Location: NI

#17 PostAuthor: chrisNI » Tue Jan 08, 2013 8:23 am

What's the disance from the centre of the eft hand downtube to the centre of the hole on the fixed bracket?
Top
nigel bessant
Hardcore
Hardcore
Posts: 1410
Joined: 13th Nov 2009
Location: Salisbury Wiltshire

#18 PostAuthor: nigel bessant » Tue Jan 08, 2013 6:08 pm

chrisNI wrote:What's the disance from the centre of the eft hand downtube to the centre of the hole on the fixed bracket?


Excellent point Chris and one that will solve this problem. The distance is 55mm and on the frame the engine came out of, it is 50 mm.
Therefore, what Gus said is correct, not that I disbelieved him, I just thought the worst and the frame was bent.
Thanks for that pointer Chris it came up trumps.

Thanks to all for their input on this, it has been very welcome.

Cheers
Nigel
Top
nigel bessant
Hardcore
Hardcore
Posts: 1410
Joined: 13th Nov 2009
Location: Salisbury Wiltshire

#19 PostAuthor: nigel bessant » Tue Jan 08, 2013 6:09 pm

Z1parR wrote:I've a bracket 58mm downtube centres and 62mm downtube to engine centre .


PM sent
Top
garyd
Hardcore
Hardcore
Posts: 2558
Joined: 11th Jun 2011
Location: West of London

#20 PostAuthor: garyd » Tue Jan 08, 2013 8:14 pm

So..did it line up...or do you need a new Brkt made?
Top
nigel bessant
Hardcore
Hardcore
Posts: 1410
Joined: 13th Nov 2009
Location: Salisbury Wiltshire

#21 PostAuthor: nigel bessant » Tue Jan 08, 2013 8:47 pm

[quote="garyd"]So..did it line up...or do you need a new Brkt made?[/quote

No, didn't line up but the plate needed wiil be the same dimensions as the fixed bracket on the left down tube.
Z1par has a bracket that from the dimensions, could well be off a shaft frame.

Cheers
Nigel
Top
User avatar
Yellow
100Club
100Club
Posts: 360
Joined: 24th Mar 2008
Location: Dublin

#22 PostAuthor: Yellow » Tue Jan 08, 2013 9:37 pm

Have this one.
Image
I believe its from a Z1100.
Looking for one to suite a 650 CSR 82. or the measurements to make one.
Cheers.
Top
nigel bessant
Hardcore
Hardcore
Posts: 1410
Joined: 13th Nov 2009
Location: Salisbury Wiltshire

#23 PostAuthor: nigel bessant » Tue Jan 08, 2013 10:04 pm

Yellow wrote:Have this one.
Image
I believe its from a Z1100.
Looking for one to suite a 650 CSR 82. or the measurements to make one.
Cheers.


I'll check the measurement from the bottom down tube fixing hole to the engine to see if yours would be suitable although I've not heard back from Z1par as yet.
Top
User avatar
Z1parR
Hardcore
Hardcore
Posts: 4901
Joined: 11th Oct 2009
Location: Chorley Lancs

#24 PostAuthor: Z1parR » Tue Jan 08, 2013 11:22 pm

PM returned , bracket here with your name on it Nigel :wink:
0172 . Geoff Parr
Top
User avatar
Z1parR
Hardcore
Hardcore
Posts: 4901
Joined: 11th Oct 2009
Location: Chorley Lancs

#25 PostAuthor: Z1parR » Thu Jan 10, 2013 9:57 pm

Post today , hope you see it saturday :D
0172 . Geoff Parr
Top
nigel bessant
Hardcore
Hardcore
Posts: 1410
Joined: 13th Nov 2009
Location: Salisbury Wiltshire

#26 PostAuthor: nigel bessant » Fri Jan 11, 2013 1:20 pm

Z1parR wrote:Post today , hope you see it saturday :D


Top man, cheers Geoff.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 13 guests