Z1100A1 J1 J2 R1 CLOCK/SPEEDO TACHO BRACKET 25008-1034

[Padders]

Hi I am looking to buy the speedo tacho mounting bracket for a Z1100A1 KZ1100A1 shaft drive 1981 if anyone has one for sale.

As below it i the same part as the J model and R1

Cheers

[london calling]

Brucie,is this the same bracket as the Z1000 J1/J2 clocks use ??

[PJ]

Brucie,is this the same bracket as the Z1000 J1/J2 clocks use ??

Brucie??

[Ginger Bear]

Ian, part No. is 25008-1034 & according to Kawasaki.com is common to these other models;

Model (5):
KZ1000-J1 (1981)
KZ1000-J2 (1982)
KZ1000-R1 (Eddie Lawson Replica) (1982)
KZ1100-A1 (Shaft) (1981)
KZ1100-A2 (Shaft) (1982)

I do have a set of 'J' clocks, but from memory they are fractured around the mounts. I will go & check once I can get away from all the family festivities...

[steve.w]

http://www.ebay.co.uk/itm/Kawasaki-Z-10 ... 4d06bb605b

[london calling]

Brucie,I'm pretty sure that I've got a clock bracket but not exactly sure where it is
I'm over to the unit on saturday,so I'll let you know when I've checked over there.

[Ginger Bear]

http://www.ebay.co.uk/itm/Kawasaki-Z-1000-J1-Speedometer-Tachometer-Clocks-Bracket-/330825424987?pt=UK_Motorcycle_Parts&hash=item4d06bb605b

This one is broken, the mounts to the top yoke have snapped off. Pity the seller didn't care to mention it in his description. There are pictures, but if you didn't know what you were looking for........

[Padders]

Thanks Jack appreciate that

Thanks Steve for the information mine has broken in the same place and had some mounts welded on but not very well.

As for Brucie thats between Jack and Me maybe one day when I have had a few beers I will tell you.

[paul doran]

Ian I have one if Jack cannot sort You out

err I mean Brucie

[Padders]

Thanks Paul appreciate it. will see how jack does then be in touch if he cannot find one.

Have a good run out this sat and remember to post some pictures.

[Padders]

Jack has found one but thanks for the offer Paul.

Cheers

[elr-21]

These are hard to find meanwhile.
Most they are broken!

I found one some years ago made of stainless steel - little bit to thick but unbreakable. So far I know a small series was made.

If this is not for a showroom-condition-bike with only genuine parts I think stainless stell is the very best solution.

Cheers

PS: I gave mine to a friend who use it until today

[Ginger Bear]

Just found a steel replacement on Alan's Kipkawa site;

http://www.kipkawa.co.uk/parts.php?link=NEW%20PARTS

[elr-21]

Yes, something like this one I meaned!

Cheers