Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Earlier Z wheel in later Z forks?

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

Earlier Z wheel in later Z forks?

#1 PostAuthor: RALPHARAMA » Fri Dec 07, 2012 3:11 pm

Will early front wheels with 4 mounting hole discs fit later GPZ type forks? Anyone tried this ?

If it works I will be in the market for a wheel and discs :D
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Top
User avatar
steve.w
ZedHead
ZedHead
Posts: 1156
Joined: 28th Jul 2008

#2 PostAuthor: steve.w » Sun Dec 09, 2012 11:41 am

big green bus is the best man to ask mate :wink:
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#3 PostAuthor: z1bman » Sun Dec 09, 2012 12:19 pm

no the early type wheels have 6203 wheel bearings + gpz have 6302 bearings which are 2mm bigger outside measurement + have a bigger wheel spindle
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#4 PostAuthor: RALPHARAMA » Sun Dec 09, 2012 7:12 pm

Thanks for that. I guess I would be able to make up some bushes of fit different bearings :D
Ralph Ferrand

Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)

http://www.bikerstoolbox.co.uk
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#5 PostAuthor: z1bman » Sun Dec 09, 2012 7:47 pm

the easiest way would be to get your original wheel spindle machined down to 15mm which is the size of the internal diameter of the older type wheel bearings .i think the z1100 spindle is 17mm in diameter
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests