Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

z650 choke railm

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
johno
Regular Poster
Posts: 35
Joined: 15th Dec 2008
Location: Buckingham

z650 choke railm

#1 PostAuthor: johno » Sat Nov 17, 2012 10:26 pm

Doe's anyone have a choke plunger lifting arm for 77b1 z 650 its the end arm that lifts the choke plunger right hand side?.
Cheers john.
Top
User avatar
pertonpc
ZedHead
ZedHead
Posts: 1036
Joined: 3rd Sep 2009
Location: Gloucestershire
Contact:
Contact pertonpc

#2 PostAuthor: pertonpc » Sat Nov 17, 2012 11:48 pm

Try John Browse at Wrexham if you are struggling to get one on here.
Where did yours vanish to?
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Top
johno
Regular Poster
Posts: 35
Joined: 15th Dec 2008
Location: Buckingham

#3 PostAuthor: johno » Sun Nov 18, 2012 7:54 am

Hi thanks for that the bike had been standing for a while before i bought it and the choke plunger seized when the guy lifted the lever i guess it must of just broke off, not a bad idea to keep an eye on them to make sure they dont get sticky.
cheers john.
Top
User avatar
pertonpc
ZedHead
ZedHead
Posts: 1036
Joined: 3rd Sep 2009
Location: Gloucestershire
Contact:
Contact pertonpc

#4 PostAuthor: pertonpc » Sun Nov 18, 2012 8:21 am

Johno
If you can find the part number for the bit you need I will check which other models and years used it. You may find it easier to get a complete carb from a less popular model that uses the same lifter.
Pretty complete 650 carbs also come up on eBay from time to time if you keep your eye on that.

Try a pm to Crofty or Guyzed on here? they have 650 some bits.

From Mark
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Top
User avatar
GUYZED
Area Rep.
Area Rep.
Posts: 2107
Joined: 9th Aug 2008
Location: READING - BERKSHIRE

#5 PostAuthor: GUYZED » Sun Nov 18, 2012 4:43 pm

Do you mean the starter plunger/lever x4 of them John...part number 16068-014?
OLD ZED'S NEVER DIE THEY JUST GO FASTER...
#449
Z1000A2 Z650B1
Top
johno
Regular Poster
Posts: 35
Joined: 15th Dec 2008
Location: Buckingham

#6 PostAuthor: johno » Sun Nov 18, 2012 5:05 pm

yes that sounds like them lifts the choke last one on carb 4 right hand side when your sat on the bike, been a job to start from cold guess only 3 carbs chokeing wont helping do you have any bit for sale?.
cheers john.
Top
User avatar
pertonpc
ZedHead
ZedHead
Posts: 1036
Joined: 3rd Sep 2009
Location: Gloucestershire
Contact:
Contact pertonpc

#7 PostAuthor: pertonpc » Sun Nov 18, 2012 5:57 pm

Hi Guyz,

Can't find the number Guy mentioned on my list.

If what you want is no. 47 on this diagram -

http://www.cmsnl.com/kawasaki-1978-kz65 ... ml#results

then it is part ref 13168-1026 called a lever, starter plunger

which came fitted to these bikes -
Model (25):
KZ1000-A1 (KZ1000) (1977)
KZ1000-A2 (KZ1000) (1978)
KZ1000-A2A (KZ1000) (1978)
KZ1000-A3 (KZ1000) (1979)
KZ1000-A3A (KZ1000) (1979)
KZ1000-A4 (KZ1000) (1980)
KZ1000-B1 (KZ1000 LTD) (1977)
KZ1000-B2 (KZ1000 LTD) (1978)
KZ1000-B3 (KZ1000 LTD) (1979)
KZ1000-B4 (LTD) (1980)
KZ1000-C1 (Police 1000) (1978)
KZ1000-C1A (Police 1000) (1978)
KZ1000-C2 (Police 1000) (1979)
KZ1000-C3 (Police 1000) (1980)
KZ1000-C4 (Police 1000) (1981)
KZ1000-D1 (Z1R) (1978)
KZ1000-D3 (Z1R) (1980)
KZ1000-E1 (Shaft) (1979)
KZ1000-E2 (Shaft) (1980)
KZ650-E1 (LTD) (1980)
KZ650-F1 (1980)
KZ650-H1 (CSR) (1981)
KZ900-A4 (1976)
KZ900-A5 (1977)
KZ900-B1 (LTD) (1976)
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Top
johno
Regular Poster
Posts: 35
Joined: 15th Dec 2008
Location: Buckingham

#8 PostAuthor: johno » Sun Nov 18, 2012 6:11 pm

yeah thats great my bike is a 77 b1 but 47 looks right now all i have to do is find one!!, thanks for you help its much appreciated, i have to sell my z1 and my h2 gutted so i need to sort the b1 its a nice bike.
cheers john.
Top
User avatar
GUYZED
Area Rep.
Area Rep.
Posts: 2107
Joined: 9th Aug 2008
Location: READING - BERKSHIRE

#9 PostAuthor: GUYZED » Mon Nov 19, 2012 1:46 pm

John...if the part your after is number 47, i have some on a old set of Z650 carbs...P.M. me your address and i'll send them to you.

Image

Is it just the one you want or a full set of four :?:
OLD ZED'S NEVER DIE THEY JUST GO FASTER...

#449

Z1000A2 Z650B1
Top
johno
Regular Poster
Posts: 35
Joined: 15th Dec 2008
Location: Buckingham

carb arm

#10 PostAuthor: johno » Mon Nov 19, 2012 2:17 pm

just want to say a big thanks to guyzed and you others for your help its been much appreciated should make the old b1 a bit happier on a cold morning!!!
cheers john
Top
johno
Regular Poster
Posts: 35
Joined: 15th Dec 2008
Location: Buckingham

#11 PostAuthor: johno » Mon Nov 19, 2012 2:59 pm

guy are there any meets or shows coming up?
cheers john
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#12 PostAuthor: Ginger Bear » Mon Nov 19, 2012 6:57 pm

johno wrote:guy are there any meets or shows coming up?
cheers john


John, Looks like a few of the 'usual suspects' might be here;

http://www.z1ownersclub.co.uk/forum/vie ... hp?t=22711
Image

# 104

Phil Churchett Award Winner 2011 & 2016 :D
Buzzworkz Best Modified Zed 2016
Top
johno
Regular Poster
Posts: 35
Joined: 15th Dec 2008
Location: Buckingham

curry

#13 PostAuthor: johno » Mon Nov 19, 2012 7:02 pm

sounds good to me!!![/quote]
Top
User avatar
GUYZED
Area Rep.
Area Rep.
Posts: 2107
Joined: 9th Aug 2008
Location: READING - BERKSHIRE

#14 PostAuthor: GUYZED » Mon Nov 19, 2012 7:37 pm

John...the carb arm was posted this afternoon...you should get in the next day or so :D
OLD ZED'S NEVER DIE THEY JUST GO FASTER...

#449

Z1000A2 Z650B1
Top
johno
Regular Poster
Posts: 35
Joined: 15th Dec 2008
Location: Buckingham

carb arm

#15 PostAuthor: johno » Mon Nov 19, 2012 7:43 pm

thank again guy have sent you a pm
best john :D
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 11 guests