Need one of these.

ted1r · #1 PostAuthor: **ted1r** » Wed Nov 07, 2012 2:32 pm

Just pull the motor to bits to find although the bores pistons rings cam chain idlers ect are all in exceptionable condition the screw in bottom guide was broke in half ,luckily both pieces were still there.

Anyone got a spare for sale????????????

Ted

#2 PostAuthor: **KeithZ1R** » Wed Nov 07, 2012 3:23 pm

Which.? what ??

#3 PostAuthor: **chrisu** » Wed Nov 07, 2012 3:48 pm

If you mean the front slipper guide then I'd strongly suggest fitting a new one.

#4 PostAuthor: **KeithZ1R** » Wed Nov 07, 2012 3:58 pm

The original one was only a M6 x 20 crosshead screw but theres. Couple of point that dont quite fit ?

z1bman · #5 PostAuthor: **z1bman** » Wed Nov 07, 2012 5:14 pm

https://www.z-power.co.uk/merchantmanag ... cts_id=440

#6 PostAuthor: **Ginger Bear** » Wed Nov 07, 2012 5:17 pm

Ted, I have a 'part worn' one, you can have, But I chose to fit a new one, as they are notorious for breaking...........

.................... Go on, spoil yourself! :wink:

https://www.z-power.co.uk/merchantmanag ... cts_id=440

ted1r · #7 PostAuthor: **ted1r** » Sun Nov 11, 2012 6:48 pm

Thanks for all your help .got it in my head that these where either not available or very exxy.
I.ll ring the Phil in morning.
Ted

#8 PostAuthor: **KeithZ1R** » Sun Nov 11, 2012 8:51 pm

did i completely miss a point here I thought you said the screw was snapped in half ?

Need one of these.

Need one of these.

post

Who is online