Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Do I need to earth Dyna S coils?
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Do I need to earth Dyna S coils?
I realise that this is probably a very stupid question, but do Dyna S coils need an earth? Have read the instructions, looked at the posts but am still not sure of the answer. I will be bolting the coils to the frame with some 10mm aluminium tube as a spacer but the frame will be powdercoated and I won't get an earth unless I remove some of the powder coat. The laminated steel core looks like it should be earthed and logic suggests that you need an earth to complete the spark plug circuit, but would like to be sure.
As Piggy says not needed but be careful about the low tension wires and connections(small wires) on dyna coils the connections are very close to the frame and tank when fitted a good idea to cover screws with some silcon also make sure you get a good 12volts to them any less use the Wired George mod just used it on a GS made a big diif !!! Cheers Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-
Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Who is online
Users browsing this forum: No registered users and 24 guests