Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

750H2 Front Caliper Piston

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

750H2 Front Caliper Piston

#1 PostAuthor: DogsbolloxofZ1B » Fri Aug 24, 2012 7:10 pm

Does anyone know wher I can buy a replacement front brake caliper piston an 750H2? Can't seem to find it on Z1 enterprise or ZedPower site :evil:

Ta Mike
Top
User avatar
Z1parR
Hardcore
Hardcore
Posts: 4901
Joined: 11th Oct 2009
Location: Chorley Lancs

#2 PostAuthor: Z1parR » Fri Aug 24, 2012 7:27 pm

A phone call to either company could reveal the parts Mike as they don't always list everything on their sites :D
0172 . Geoff Parr
Top
User avatar
pertonpc
ZedHead
ZedHead
Posts: 1036
Joined: 3rd Sep 2009
Location: Gloucestershire
Contact:
Contact pertonpc

#3 PostAuthor: pertonpc » Fri Aug 24, 2012 7:43 pm

Hi Mike,

Looked at H2C listing - think 4304-8001 is the one you need.

I got some new ones with seals that measure 42.79mm diam and 40.05mm tall

They are equivalent to 4304-8009 - Z650, 900, 1000 etc.

Drop me a pm if one of these might help you.

From Mark
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#4 PostAuthor: z1bman » Fri Aug 24, 2012 7:44 pm

http://www.ebay.co.uk/itm/KAWASAKI-H1-H ... 3910b#shId
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#5 PostAuthor: DogsbolloxofZ1B » Fri Aug 24, 2012 8:00 pm

pertonpc wrote:Hi Mike,

Looked at H2C listing - think 4304-8001 is the one you need.

I got some new ones with seals that measure 42.79mm diam and 40.05mm tall

They are equivalent to 4304-8009 - Z650, 900, 1000 etc.

Drop me a pm if one of these might help you.

From Mark


Mark,
I'll go and check its dimensions, I know they are smaller OD than z1. Be in touch soon.
Cheers, Mike
Top
User avatar
kas750
Hardcore
Hardcore
Posts: 1251
Joined: 6th Oct 2009
Location: Chorley

#6 PostAuthor: kas750 » Fri Aug 24, 2012 8:00 pm

http://www.kawasakitripleparts.com/inde ... uct_id=171
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#7 PostAuthor: DogsbolloxofZ1B » Fri Aug 24, 2012 8:43 pm

Kas750
That's the one :D I've just measured it at 38.12mm OD and 34.05 H.

Cheers, Mike
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

Z1 Front Caliper Pistons

#8 PostAuthor: DogsbolloxofZ1B » Sat Aug 25, 2012 9:44 am

Has anyone remanufactured Z1 caliper pistons and got a few spare? £45 seems a tad excessive for a bit of turned bar with a counterbore. :evil:
I'm looking for 3 pistons 42.8mm OD x 34.00 H

I'm off to visit a guy in Milton Keynes this afternoon with a view to buying a restored Myford Super 7 lathe, might take a while to convince the missus I need one:D

Mike
Top
User avatar
jimmock
Hardcore
Hardcore
Posts: 8947
Joined: 1st Dec 2009
Location: Central Scotland, near Zedinburgh.

Re: Z1 Front Caliper Pistons

#9 PostAuthor: jimmock » Sat Aug 25, 2012 11:36 am

DogsbolloxofZ1B wrote:Has anyone remanufactured Z1 caliper pistons and got a few spare? £45 seems a tad excessive for a bit of turned bar with a counterbore. :evil:
I'm looking for 3 pistons 42.8mm OD x 34.00 H

I'm off to visit a guy in Milton Keynes this afternoon with a view to buying a restored Myford Super 7 lathe, might take a while to convince the missus I need one:D

Mike


Just buy her a pair of shoes out of Matalan.

Thats what I do, works a treat EVERY time!!!
Jimmock. :wnkr


SPEED IS JUST A QUESTION OF MONEY...HOW FAST DO 'YOU' WANT TO GO?

I hate people I don't like !
Top
User avatar
jimmock
Hardcore
Hardcore
Posts: 8947
Joined: 1st Dec 2009
Location: Central Scotland, near Zedinburgh.

#10 PostAuthor: jimmock » Sat Aug 25, 2012 11:40 am

Stainless pistons.

That is the way to go.

Buy them / make them ONCE!!!!
Jimmock. :wnkr





SPEED IS JUST A QUESTION OF MONEY...HOW FAST DO 'YOU' WANT TO GO?



I hate people I don't like !
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 9 guests