Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

swing arm bush conversion

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
wayno
100Club
100Club
Posts: 449
Joined: 15th Nov 2009
Location: swansea

swing arm bush conversion

#1 PostAuthor: wayno » Sat Jun 23, 2012 2:09 pm

i bought this conversion kit for a swingarm but the instructions are in german, just to be sure i thought i has better ask on here which way the 2 washers on the outside of the new tube , this sticks out about 5 mm or so either side, one washer has a bit in the middle that rotates the other is a plain one.

http://www.z-fever.de/ShopNeu/shop/show ... cts_id=539
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Sat Jun 23, 2012 3:42 pm

the flat washers are fitted to the end of the shaft. one either side. then the dished washers fit over the top on the outside
Top
wayno
100Club
100Club
Posts: 449
Joined: 15th Nov 2009
Location: swansea

#3 PostAuthor: wayno » Sat Jun 23, 2012 6:57 pm

thats what i thought, but now they have arrived the ones in the pic that go on the inside are only just smaller in diameter than the dished ones, the pic looks like they would sit over the inners but dont. will have to try in the frame when i get it back on mon.

cheers wayne
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 13 guests