Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Cylinder Head Question
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Cylinder Head Question
Due to debris in crankcase I have decided to remove the cylinder head to check the camchain guides. I have now discovered I have a z1000 head on 903cc barrels, will this have a detrimental effect on anything and which head gasket should be fitted. Thanks in advance
-
Steve Cooke
- Hardcore
- Posts: 1612
- Joined: 18th Mar 2007
- Location: Southampton
No detrimental effects whatsoever, it can only be better as you've less chance of snapping the exhaust studs 
and just use standard gaskets.
There's a good chance that an idler has collapsed due to the plastic insert giving up my old Z1000 did this but still ran pretty well when they do collapse the idler rattles around on it's shaft and grinds into the barrels.
and just use standard gaskets.
There's a good chance that an idler has collapsed due to the plastic insert giving up my old Z1000 did this but still ran pretty well when they do collapse the idler rattles around on it's shaft and grinds into the barrels.
Who is online
Users browsing this forum: No registered users and 22 guests