Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Brake lever mounting stud

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Bill Newman
100Club
100Club
Posts: 459
Joined: 27th May 2007
Location: Ipswich

Brake lever mounting stud

#1 PostAuthor: Bill Newman » Sun May 20, 2012 9:29 pm

I have just wrung the stud off the frame on my Z900 A4 that retains the brake arm on the mount. Does anyone know if it is mounted through the frame( like footrest studs) or is it integral to the frame and therefore needing to have a new stud welded. I have just had the frame painted and do not want to have to scrape away more than neccesary

Damn thing felt like it was made of cheese when it sheared...
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Sun May 20, 2012 9:43 pm

do you mean the stud that secures rear brake pedal
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#3 PostAuthor: z1bman » Sun May 20, 2012 9:53 pm

hi bill if it is this stud in your photo it is part of the pedal mounting which is part of the frame i would drill the mounting out to 8mm + insert a 8mm stud


Image
Top
User avatar
Bill Newman
100Club
100Club
Posts: 459
Joined: 27th May 2007
Location: Ipswich

#4 PostAuthor: Bill Newman » Sun May 20, 2012 10:00 pm

z1bman wrote:hi bill if it is this stud in your photo it is part of the pedal mounting which is part of the frame i would drill the mounting out to 8mm + insert a 8mm stud


Image


I had forgotten that I had put these up. Yes it is that stud. Was refitting the brake arm this afternoon and it turned off not much more than finger tight. Guess I will have too do the drill thing - pity is that its a rolling chassis now so drilling will need a steady hand...
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#5 PostAuthor: z1bman » Sun May 20, 2012 10:39 pm

easy job mate just grind the stud flat to the pedal mount. then find the centre then drill + tap out to the desired thread size
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 20 guests