Had a bad time today whilst rebuilding the front end of my bike. I fitted a replacement headlight ear (for one that came off the bike - because it was bent), only to find that the headlight was angled to the nearside - instead of aligning straight ahead. After thinking the fork legs were twisted I took everything apart and rebuilt it again - with the same result. I checked everything with a laser and found all was straight and square on the forks.
Then I discovered that the ears were different...the original has a dimension of 123mm from the back of the tube to the front edge of the arm whilst the replacement has a dimension of 132mm
Which one is right? I now have to try and find a good one of the right length...
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z900 A4 Headlamp ears
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
Steve Cooke
- Hardcore
- Posts: 1612
- Joined: 18th Mar 2007
- Location: Southampton
-
Bill Newman
- 100Club
- Posts: 459
- Joined: 27th May 2007
- Location: Ipswich
Who is online
Users browsing this forum: No registered users and 16 guests