Did that and they fit perfect
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
fitting alloy cam end plugs
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: ======
zman wrote:I have just fitted ally ones from zpower.They sat a bit proud.dave at zpower said just dont modify.just tap into place.
Did that and they fit perfect
I would just be careful about tapping them into position, depending upon how bad a fit they are it could be quite easy to crack the casting around the cut-out where they sit in the head.
Last time I mentioned this someone got annoyed with me, implying they didn't know what they were doing, egged on by a certain "Davey" character.
All I'm saying is be careful
Who is online
Users browsing this forum: No registered users and 15 guests