Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Clocks from Z750 Twin
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
FreddaAbborre
- 100Club
- Posts: 120
- Joined: 13th Jun 2011
- Location: Lund, Sweden
Clocks from Z750 Twin
Can I use clocks from a Z750 twin on my Zed? The max limit is 220km/h and 10krmp. Is the angle of the needle the same; so I can use new faces showing 240/12krpm?
Z1 Moto Martin
Z1B
Z1000 A1
Z1000 A2
Z1000 MkII
H**** FT500
Z1B
Z1000 A1
Z1000 A2
Z1000 MkII
H**** FT500
Re: Clocks from Z750 Twin
FreddaAbborre wrote:Can I use clocks from a Z750 twin on my Zed? The max limit is 220km/h and 10krmp. Is the angle of the needle the same; so I can use new faces showing 240/12krpm?
Post a pic and either I or Al Marshall can tell you.
Will.
Kawasaki H2C 750, ZRX1100R, H**** VF1000RG Rothmans, H**** VF500F2F, Suzuki GSXR750F Slabbie
-
FreddaAbborre
- 100Club
- Posts: 120
- Joined: 13th Jun 2011
- Location: Lund, Sweden
Re: Clocks from Z750 Twin
Big Fluff wrote:FreddaAbborre wrote:Can I use clocks from a Z750 twin on my Zed? The max limit is 220km/h and 10krmp. Is the angle of the needle the same; so I can use new faces showing 240/12krpm?
Post a pic and either I or Al Marshall can tell you.
Will.
Here's a pic. Not the best one, havn't bought the clocks yet.
Z1 Moto Martin
Z1B
Z1000 A1
Z1000 A2
Z1000 MkII
H**** FT500
Z1B
Z1000 A1
Z1000 A2
Z1000 MkII
H**** FT500
The speedo (same as Z650) will be fine, and I can provide you with a MPH dial kit to go over the top of the KMH faces.
The rev-counter should be okay as I believe it's the cam gear ratio that's different on the Z750 twin head. i.e. although Z1 to Z1000A2 rev-counter faces read up to a max of 12000rpm, it should still read correct, but ending earlier at the 10000rpm.
will.
The rev-counter should be okay as I believe it's the cam gear ratio that's different on the Z750 twin head. i.e. although Z1 to Z1000A2 rev-counter faces read up to a max of 12000rpm, it should still read correct, but ending earlier at the 10000rpm.
will.
Kawasaki H2C 750, ZRX1100R, H**** VF1000RG Rothmans, H**** VF500F2F, Suzuki GSXR750F Slabbie
-
FreddaAbborre
- 100Club
- Posts: 120
- Joined: 13th Jun 2011
- Location: Lund, Sweden
Big Fluff wrote:The speedo (same as Z650) will be fine, and I can provide you with a MPH dial kit to go over the top of the KMH faces.
The rev-counter should be okay as I believe it's the cam gear ratio that's different on the Z750 twin head. i.e. although Z1 to Z1000A2 rev-counter faces read up to a max of 12000rpm, it should still read correct, but ending earlier at the 10000rpm.
will.
But are the clocks basically the same as clocks for Zeds, but with lower max-gradings?
I'm in Sweden so I would change the faces (10krpm/220km/h) to faces for Z1 (12krpm/240Km/h).
Z1 Moto Martin
Z1B
Z1000 A1
Z1000 A2
Z1000 MkII
H**** FT500
Z1B
Z1000 A1
Z1000 A2
Z1000 MkII
H**** FT500
Who is online
Users browsing this forum: No registered users and 22 guests