modern front mud Gard

[zman]

im looking for a more modern front mudguard for my z900.does any one know what might fit
thanks

[pertonpc]

If you are not using a fork brace be a bit careful...
the standard fender has a reinforced section inside between the forks which reduces flexing - a pretty modern plastic one, or a cheap chrome one with only one layer of metal, would not do the job.
Good luck with the search from Mark

[zman]

Thanks mark.
Ive got a really good brace so no probs there.
i like the shape of the Z750 but don't know if i can make it fit

[ADRIAN H]

I am looking at the new Triumph Bonneville, Thruxton, Scrambler - front mudguard, (as they run 100/90x19 tyres).
But I need to check a few dimensions down at local dealer, as I am sure I will have to make a special mounting/ support bracket to get it to fit.

[Serps]

Zman, are you talking about a current z750 ?

If you are I will have a look and measure as I have a. 2010 model

Paul

[zman]

Yes paul.
not sure how it would fix.
Do you have both so you could check before i buy something thats no good Thanks

[Serps]

Had a measure and I don't think it will fit, the 750 is 6" wide between the forks, the z900 is 5".
You could butcher the mudgard to fit but I think that would ruin it and look pants. You would also need to put the callipers behind the forks.
Best bet is to find something 5" wide.

[Ginger Bear]

I have an XJR 400 Mudguard on this, I'll try & measure the width tomorrow.

[ADRIAN H]

Could try one of these. (black, they also do a red one).

http://www.patternbikeparts.com/product ... uctID=4259